• Digital VLSI Design
• MOS device Modelling
• Low Power VLSI Design
• Semiconductor Devices

• Five days Workshop conducted at National Institute of Technology Calicut, organized by Department of Electronics and Communication Engineering on “Recent Trends in Semiconductor Devices and MEMS/NEMS” 2019.
• Three days Workshop conducted at Silicon Institute of Technology, Bhubaneswar on “Advance CMOS based Nano Devices” 2016.
• Short Term training Programme through ICT Mode (one week) on “Introduction to Network Security” organized by National Institute of Technical Teachers and Research Kolkata.
• Four days Workshop on Nanofabrication Technologies, Indian Nanoelectronics User’s Programme (INUP) IIT Bombay, 2016.
• Two days National Seminar on Quality Improvement in Technical Education Through Outcome Based Education Sponsored by NAAC at VJIT Hyderabad, 2018

• Vandana, B., and S. Patro. “Challenges and Limitations of Low Power Techniques: Low Power Methodologies in Analog and Digital Circuits.” Design and Modeling of Low Power VLSI Systems. IGI Global, 2016. 48-70.
• Patro, B. Shivalal, and Vandana, B. “Low Power Strategies for beyond Moore’s Law Era: Low Power Device Technologies and Materials.” Design and Modeling of Low Power VLSI Systems. IGI Global, 2016. 27-47.

• Signals and systems
• Analog Communication
• Digital communication
• Signal/Image processing
• Telecommunication Switching System
• Cellular and Mobile Communications W
• ireless Communications and Networks

• N.Narasaiah, Dr. S Vathsal, Dr.D Venkat Reddy, “Dual Filter Based Images Fusion Algorithm for CT and MRI Medical Images”, IJITEE, ISSN: 2278-3075, Volume-8 Issue-9 July 2019.
• N.Narasaiah, Dr. S Vathsal, Dr.D Venkat Reddy, “A Survey on image fusion requirements, techniques, evaluation metrics and its applications”, IJET, June 2018.
• N.Narasaiah,”web surveillance system using raspberry pi”, IJERT, Volume 4, issue-03, march 2015.
• N.Narasaiah, Dr. S Vathsal, Dr.D Venkat Reddy, “Air craft navigation sensors/systems and the significance of multisensor data fusion”, IJCRT, Dec 2017.
• M.N.Narasaiah, Dr. S Vathsal, Dr.D Venkat Reddy, “MULTISENSOR DATA FUSION FOR AIRCRAFT NAVIGATION: OVERVIEW AND METHODOLOGY”, IJIET, Dec 2016.

• Organized One week FDP on “Academic Excellence in Engineering Education – Strategic approach” as a Convener at KG Reddy College of Engineering and Technology, June 24-29, 2019.
• One week refresher programmer for faculty on electrical circuits and network analysis organized by department of electrical and electronics engineering department from 26/09/2005 to 01/10/2005.
• Two day national level workshop on “FPGA Synthesis and Simulations using XLINX tools” organized by Department of ECE, Vidya Vikas Institute of Technology from 18/08/2009 to 19/09/2009.
• Four day Staff Development Program on “DSP processor Architecture and Programming” organized by Department of ECE, in association with ISTE chapter &IIPC of VNR VJIT During 19/12/2011 to 23/12/2011.
• Two days Workshop on “Embedded system Technology” conducted by ECE Dept, KG Reddy College of Engineering and Technology. 23^rd and 24^th 2013
• One day complimented seminar on “Matlab and simulink for engineering education” conducted by MathWorks India on 11-8-2014
• Two days Workshop on “Design and implementation of student centered learning” conducted by footsteps and international institute for developing engineering academics (IIDEA),at KG Reddy College of Engineering and Technology. 5and 6 jan 2016.
• 10 days Workshop on “Intelligent signal processing and control system design using bio inspired algorithms ” conducted by E & ICT NIT Warangal during 22^nd – 31^st May 2017.
• One week FDP conducted by CEED, KG Reddy College of Engineering and Technology. During 4^th to  9^th  Dec 2017
• Two week FDP on “Teaching and learning and technical knowledge and skills enhancement program” conducted by CEED at KG Reddy College of Engineering and Technology. During 14^th  to  26^th  May 2018
• Three days workshop on “ To train the trainers for implementation of induction program ” conducted by JNTUH being o organized under TEQIP-III. During  17^th  to 19^th  May 2018

• Successfully completed NPTEL online course on “Principles of Communication System-I” with consolidated score of 81%, Jan-April 2019.
• Excellence in teaching award for securing 100% passes in “Wireless Communications and Networks”.
• Excellence in teaching award for securing 100% passes in “Cellular and Mobile Communications”.
• Excellence in teaching award for securing 100% passes in “Telecommunications Switching Systems”.
• Felicitation by Rotaract District organization on 5-sep-2014.

• S. A. Manchalwar, Seismic response reduction of RC frame staging in elevated water tank,JETIR,March 2019,ISSN 2349-5162, Volume No 6,Issue No 3,2018-19.S
• S. A. Manchalwar,Earthquake response control of RC water tower frame staging using special protection system,Civil engineering research journal,March 19, 2018,ISSN 2575-8950,Volume No 4 ,Issue No 1,2017-18.
• S. A. Manchalwar,Seismic response control of open ground storey,IJISRT,June 2017,ISSN 2456-2165 Volume No 2,Issue No 6,2017-18.
• M. Shende¹, A.M. Pande² and Sakshi Manchalwar (2018). “Prediction of flexural Strength of SFRC form Concrete Strength without fibres”, Materials Science and Engineering, 410, doi:10.1088/1757-899X/410/1/012023. (Scopus).
• Manchalwar, S. (2018). “Seismic Response Control of RC Water Tower Frame Staging”, GRAĐEVINAR. (under review).
• Manchalwar, S. (2018). “Earthquake Response Control of Ground Soft Storey”, Journal of Geography and Cartography. (Accepted on 24 March 2018)
• Manchalwar, S. and Manchalwar A. (2017). “Seismic Response control of RC water tower frame staging”, In proceeding of Indian Conference on Applied Mechanics (INCAM) 2017, MNNIT Allahabad, 5– 7 July 2017.

• Attended national seminar on student centric learning apart from chalk and talk by Internal quality assurance cell,PJLCE, Nagpur.
• Attended Training Programme On Wind Analysis at VNIT, Nagpur National institute of technical teachers training and research chandigarh.
• Attended Workshop on Next generation wireless networks through ICT
• Attended Workshop on“Earthquake Analysis and Design of multistoried Building” at VNIT, Nagpur.
• Attended Workshop on Fiber Reinforced Concrete at YCCE Nagpur.

• Seismic response control using energy dissipater in Current Trends in Civil Engineering at YCCE, Nagpur on 18, 19 December, 2014
• Earthquake Analysis of ESR in TechEd – 16 at TGPCE, Nagpur on 22 – 23 Jan. 2016

 Number of Paper Presentations (National Conferences)

• Analysis of 3 storey RC frame, in Advances in Engineering, Technology and Applied Science at YCCE, Nagpur on 17 – 18 March, 2016.
• Comparative Study of Seismic Analysis of 3 Storey RC frame in CYNOSURE-16 at PCE Nagpur on 21^ST -22^ND March,2016
• Comparative Study of Seismic Analysis of 3 Storey RC frame in Advances in Engineering, Technology and Applied Science at YCCE, Nagpur on 17 – 18 March, 2016
• Effect of vermi composting with Nirmalya waste management in CYNASORE -16 at PCE Nagpur on 8^th -9^th March 2017

• Worked as Forum In charge (SPACE) of Civil Engg.
• Worked as Forum Co In charge (SPACE) of Civil Engg.
• Worked as laboratory In charge of Fluid Mechanics & Engineering Mechanics
• Worked as a project guide of UG students of Civil Engg.
• Worked as Departmental Academic In charge.
• Worked as committee member for RTMNU Theory exam Winter-2014 & Summer-2015.
• Worked as committee member of TARANG-15 cultural event in college.
• Worked as Departmental Magazine In charge
• Worked for NACC Accreditation

• Indian Concrete Institute
• Indian Society of Technical Education
• International Association of Engineers

• University 2^nd Topper in MTech
• Received Best Project Mentor Award consistently for three years

• “Jamming Attacks Prevention in Wireless Networks Using Packet Hiding Methods”published in IOSR Journal of Computer Engineering Vol.5 Issue 3,Sep-Oct.2012

• C.Ramakrishna,Ch,vineeth,G.Shashank,”Smart Energy Meter”, International Journal of Management Technology and Engineering ISSN NO 2249-7455 Vol.4, Issue 6, April 2019.
• C.Ramakrishna, K.Manisha,V.Bhavani,” Automatic Time Table Generation Using Web Application”, International Journal of Management Technology and Engineering ISSN NO 2249-7455 Vol.4, Issue 6, April 2019.
• C.Ramakrishna,Madar Bandu,G.Kiran Kumar,”Captcha breaking Using Segmentation”, International Journal of Computer Applications-UGC, Vol. 166, Issue 4, May 2017
• C.Ramakrishna,Ch,Naveen Kumar,”Evaluation of Sensitive Data Security in Android”, International Journal of Computer Science and Information Technology ISSN NO 0975-9646 Vol.7, Issue 4, July 2016.

International Journals:

• Participated in a National conference on National conference on Research Advancements in Computational Informatics(RACI 2018)Organized by Anurag Group of Institutions held on 16th & 17th March 2018

• NPTEL Certified in Problem Solving Through Programming in C
• NPTEL Certified in Programming in C++
• NPTEL Certified in Cloud Computing

• Networking
• Cloud Computing
• Cryptography

• Shelly Sinha “Composite Searchable Encryption(CSE) For Group Data Allocation through Cloud Storage “ International Journal of Research(IJR), vol-04, Issue 09 August 2017, ISSN: 2348-6848

Published a paper on “Implementation Of Responsible Data Storage In Consistent Cloud Environment” IJRRECS/November 2014/Volume-2/Issue-11/3699-3703

• Participated in national level Two-day workshop on “Simulators Of wireless Networks” conducted by Nihon Communication Ltd., Bangalore and ECE Dept in JNTU-H.
• Participated in national level three-day workshop on “MOBILE APPLICATION AND DEVELOPMENT USING J2ME & ANDROID”  in JNTU-H.
• Presented paper in national conference on automation, communication & computing-2010 (NCACC-2010) on ”EFFECTIVE AND EFFICIENT HIVING ALONG WITH INDEXING SPATIAL DATA IN PEER-TO-PEER NETWORKS” in Gitam University, Vishakhapatnam.

• I have membership in “The Society of Digital Information and Wireless Communications(SDIWC)”.
• I have membership in “The International Association of Engineers”.

• I got  Microsoft certified professional(MCP) Certificate  with an aggregate of 98%.
• I got  Microsoft certified Trainer(MCT) Certificate with an aggregate of 95%.

• Srinivas J,Dr.Rajandra K Sharma,” Logical study on evolution of new design for energy optimization in wireless sensor network using latest techniques”,International Journal of advances in arts, science and engineering (ijoaase.com), ISSN. 2320-6144 (Online) Volume 4 Issue 9,Sep 2016.
• Srinivas J,Dr.Rajandra K Sharma,“Survey Study on development and Challenges in sensor networking in wireless sensor network”,Airo International Research Journal,ISSN No:2320-3714,Volume V,March,2016.
• Jhade Srinivas , Dr.P.Chenna Reddy, “Enhancement Study of Power Aware Routing protocols in Ad-hoc Networks”, International Journal of Advanced Research in Technology,ISSN No:6602-3127,Vol.1 Issue1,Pg:71-75,2011.

International Conference:

• J.Srinivas,”Energy conserving routing protocol for adhoc networks”International conference on “Latest  Research Trends in Engineering,Technology,Management,arts,Science,Education,Pharmacy,law & Medical Sciences”(LRTETMASEPLMS-June 2016) being held on 25-26 June 2016 at International Institute of advanced research.
• J.Srinivas,”Identifying a stable and loop free route in mobile adhoc  network ” International conference on Current Research in Emerging, Technology,management,arts,Science,education     ,pharmacy & medical             (CRETETMASEPM JAN 2016) being held on 17-18  January,2016 at        IIAR,hyderabad.
• Jhade Srinivas, “Performance Study of Power Aware Routing protocols in Ad-hoc Wireless Networks” International Conference on Wireless Networks & Embedded Systems (WECON-2009) being held on 23-24 October, 2009 at Chitkara Institute of Engineering & Technology, Rajpura, (Punjab).
• Jhade Srinivas ,  “Enhancement Study of Power Aware Routing protocols in Ad-hoc Networks”, International Conference on  Advanced Computer Technology (ICACT 2011) held on 29-30 July 2011,at J.K.K.Nattara College of Engineering and Technology,Tamil Nadu,India.
• Jhade Srinivas ,  “Transmission Power control in wireless Ad Hoc Networks”, International Conference on  Communication,Signal Processing,Computing and Information Technologies (ICCSPCIT- 2014) held on 26-27 December,2014,at Malla Reddy College of Engineering and Technology, Hyderabad ,India.

• Secured GATE Percentile 93 in the year 2012
• Secured GATE Percentile 88 in the year 2007
• I got Cent percent marks in Mathematics in S.S.C in 1991.
•  I got District level Second prize in Drawing.

• A Review of Cyber law in data mining and artificial law. this is published in International Journal of Scientific Research and Review. Vol.8 and Issue 5 2019.
• Application of Artificial intelligence methods towards cyber crimes. This is published in Research Review International journal of multidisciplinary. Vol.04,issue-05.may -2019

—

Software Engineering, Operating Systems, Database Management System, Data Structures, Design and analysis of Algorithms.

Software Engineering, Operating Systems, Database Management System, Data Structures, Design and analysis of Algorithms.

• Participated in 2 days workshop on Design and Implementation of Student centered Learning at KGRCET in January 2016

• Participated in 1 week Faculty Development Program at KGRCET in December 2017.
• Participated in 1 week Faculty Development Program at KGRCET in MAY 2018 on Effective Teaching & Learning.

Conference attended:

•  Attended 2nd National Conference on Engineering, Science, Technology in industrial applications and Significance of Free Open Source Software’s at KGRCET in December 2017.
• Attended 1st National Conference on Recent Trends in Engineering Education and Significance of Free Open Source Software’s at KGRCET in December 2016.

• MD Asif,. “Design and FPGA Implementation of Optimized 32-Bit VedicMultiplier and Square Architectures”. International Journal of Engineering Research. Vol. 3, Issue.1, 2015, pp 196-202. https://www.ermt.net/docs/papers/Special_Issue/2017/ICETSE/290P.pdf
• ANALYSIS OF MSA, PARABOLOID AND LENS ANTENNAS USING SHF FOR WIRELESS COMMUNICATION DEVICES”, INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS (IJCRT), ISSN:2320-2882, Volume.6, Issue 1, Page No pp.289-296, December – 2017, Available at : http://www.ijcrt.org/IJCRTNCES045.pdf.
• “Short Range Voice Communication using Bluetooth”, international journal of creative research thoughts (ijcrt), issn:2320-2882, volume.6, issue 1, page no pp.233-237, december – 2017, available at : http://www.ijcrt.org/ijcrtnces035.pdf
• “Executing Multiple Identities in IMS/VOLTE Networks utilizing Implicit Registration” MD. Asif1 , Angotu Saida2 M.Tech, Asst. professor Department of Electronics Communication and Engineering K G Reddy College of Engineering and Technology, Moinabad, RR District, Telangana. JASC: Journal of Applied Science and Computations Volume VI, Issue II, February/2019 ISSN NO: 1076-5131.
• “Future Technology for Mobile Communication System” Angotu Saida1 , MD Asif2 1,2KG Reddy College of Engineering & Technology Department of Electronics and Communication Engineering, JASC: Journal of Applied Science and Computations Volume VI, Issue II, February/2019 ISSN NO: 1076-5131.
• “Potential Capability of LTE-Advanced Physical Layer” MD.Asif Assistant Professor , Department of Electronics and Communication Engineering, K G Reddy College of Engineering and Techology, India, http://www.gjesr.com/Issues%20PDF/Archive-2018/June-2018/19.pdf

• Published a paper in IJSR an international journal “Wi-Fi based wireless data logger

International Conferences

• Published a paper for IEEE ICOEI-2017 titled “T- shape Microstrip Patch Antenna for WiMAX Applications” held at Scad college of Engineering &Technology Tirunelveli Tamilnadu.
• Published paper for IEEE 3^rd International conference ICSSS 2017 held at Chennai titled “Wideband Four Arm Log-Periodic Planar Antenna with Wi-Fi Band Rejection”.
• Published a paper for International conference on contemporary engineering and technology-2017 with title “LabVIEW based wireless datalogger” held at Potti Sriramulu chalavadi mallikarjuna Rao college of Engineering and Technology Vijayawada Andhrapradesh.
• Published a paper for IEEE International conference on Recent Innovations in signal processing and Embedded system (RISE 2017) held at Maulana Azad NIT Bhopal with title “Design of patch antenna with omni directional radiation pattern for wireless LAN applicatons”.
• Published a paper for IEEE International conference on computing methodologies and communication (ICCMC 2018) held at Surya Engineering college during Feb-2018 at Erode Tamil Nadu with title “Standard access for research to feat spatial time based data using RFID and sensors.

• Attended One week faculty development program on “Signal Processing techniques” held at MVSR college of Engineering Hyderabad.
• Attended One week faculty development on “Recent trends in PLC, LabVIEW and Internet of things” (IOT) held at Sanjeevan Engineering &Technology institute Kolhapur Maharashtra.
• Attended one week faculty development program on “VLSI design” conducted by NITTTR Chandigarh.
• Attended One week faculty development program on “Acadaemic excellence in engineering education-strategic approach held at KGRCET Moinabad Telangana.

• Published a paper on “Embedding of Iris Data to Hand Vein Images Using Watermarking Technology to Improve Template Protection in Biometric Recognition”, IJMETMR, ISSN no: 2348-4845. (http://www.ijmetmr.com/olnovember2016/GarikaSreekanth-PenkiRamesh-32.pdf)

• Published a paper on “Design of low power efficient full Adder using GDI Technique” in the International conference on communication and Advance Computing (ICOCAC)-2018.               (https://app.box.com/s/ujncwsnletye8uniymcff1y75rx2m5lz

• Two weeks National level Workshop on “Advanced VLSI Technology” Department of ECE at Geethanjali College of Engineering & Technology in Hyderabad.
• One week National level Workshop on “SIGNAL ANALYSIS AND TRANSFORM TECHNIQUES” organized by the E & ICT Academy, NIT Warangal, at Vignan’s Lara institute of technology & science.
• Two days “National Conference on Engineering, Science, Technology in Industrial Applications and Significance of Free Open Source Software” (NCESTFOSS-2017) at KG Reddy College of Engineering & Technology in Hyderabad
• One week FDP on “EFFECTIVE TEACHING & LEARNING” Between 14/5/18 to 18/5/18 at KG Reddy College of Engineering & Technology in Hyderabad.
• One week FDP on “Introduction to Network Security” organized by this NITTTR, Kolkata. From 03.12.2018 to 07.12.2018.
• Five days FDP on “UBA-Rural Immersion and Community Engagement” by MGNRE Hyderabad from 08.07.2019 to 12.07.2019

• Qualified in the CBSE-UGC NET-JUNE 2019.
• Best paper Award in ICOCAC-2018
• Qualified in the CBSE-UGC NET-NOV 2017.
• Qualified the GATE-2006 & 2007.

M.Tech in Embedded Systems in Sri Joginapalli B.R Engineering College (JBREC) in the year 2011.

• EDC, DLD, DLD & CO, STLD, AC, DC,                                                                      CSE, IT, ECE ,LDIC, IC, MP & MC, MPID,ECA,EC

• . Paper Presentation and National Level Conference on ‘Wireless and Satellite Systems’ on 22 to 24^th June, 2017 by ISRO, of Space , Govt. of India.
• DESIGN  OF PRIRITY ENCODING BASED REVERSIBLE      COMPARATORS                          www.ijvdcs.org/uploads/364521IJVDCS13138-318.pdf
• LOW POWER AND AREA  EFFICIENT SHIFT REGISTER USING PULSE LATCHES.                   www.ijvdcs.org/uploads/125364IJVDCS12334-239.p

 INTERNATIONAL CONFERENCES:

•  Paper Presentation on ‘Content Based Satellite Cloud Image Retrieval and Rainfall Estimation using SHAPE feature ISSNo. 2348-8549’ in the ICRTESTM-2017 on 24^th April, 2017.

Research Paper Published in International Journals:

• Narayana M and Chandra Prakash D, “Content Based Satellite Cloud Image Retrieval using Texture features” published in IJERA Journel Vol.No.7, Issue No.6, ISSN: 2248-9622, June 2017

• ‘One Day Workshop on Embedded Linex Device Drivers’, held on 31^st March 2014 at IETE Hall OU Campus. 

• ‘One Day Workshop on Advanced Programming Techniques with MATLAB’ held on Sept 2016 JNTUH.

• Attended Faculty Development Program “Research Methodology” in SVIT College on 9^th and 10^th Nov, 2016

• National Level Conference on ‘Economic Transformation towards Sustainable Development’ organized by JJTU, on 17^th and 18^th

• National Conference on, ‘ICSDETMSSS-2016’, held on JJTU during 5^th and 6^th Nov, 2016.

• National Conference on, ‘Smart Cities Prospects Challenges and Impact on Rural India’, held in JJTU on, 28^th Oct, 2016.

• BEST SINGER IN COOLEGE LEVEL.

• Digital communication
• Digital image Processing
• embedded system
• VLSI
• Artifial intelligence
• signals and systems

• Digital Communications
• Electronic circuits
• Digital image Processing
• Electronics devices and circuits

• Poonam G. Swami and S.K.Sudhansu “Multiple-input multiple-output OFDM with index modulation using frequency offset”, IOSR Journal of Electronics and Communication Engineering (IOSR-JECE), Vol. 12, issue 3, PP. 56-61 May-June 2017.                                                                                                                      Link: DOI-10.9790/2834-1203015661

• Poonam Swami, MA. Suhana Praveen, C. Deepika “SURVEY ON MIMO OFDM WITH ADVANCED INDEX MODULATION” 2018 IJCRT Volume 6, Issue 2 April 2018 ISSN: 2320-2882.                        (http://www.ijcrt.org/viewfull.php?p_id=IJCRT1812851)

• Deepika, MA.Sohana Parveen, Poonam Swami “ dual node pulse domino technique for buffer circuit in low power memory arrays” IJCRT, Volume 6 , issue 2 April 2018 , pp 572-578 .                              (https://waset.ijcrt.org/viewfull.php?p id=IJCRT1812941)
• Suhana Praveen, C. Deepika, Poonam Swami “AN FPGA IMPLEMENTATION OF PARALLEL 2-D MRI image filtering algorithm using QUARTUS-II” GJESR, Volume 6, Issue June 2018 ISSN: 2348-8034.
• Poonam Swami, MA. Suhana Praveen, C. Deepika “Mobile phone analysis in digital forensics” JASC, Volume 6, Issue II FEB 2019 ISSN: 1076-5131 (https://app.box.com/s/3u2lyxziq3dryza5umtiq8v6yz85ee89)

• Deepika, MA.Sohana Parveen, Poonam Swami “A Review Report On Switching Aware Techniques for Domino Circuits” JASC, Volume 6, Issue II FEB 2019 ISSN: 1076-5131.                                                                                                                  ( https://app.box.com/s/grmq09qd63zxsb2lafvgmpxlbx7vgivl)

• Suhana Praveen, C. Deepika, Poonam Swami “A Survey on Minimization of Floor planning Area” JASC, Volume 6, Issue II FEB 2019 ISSN: 1076-5131.         (  https://app.box.com/s/r2xmdpsdanpclsmb5g4gijyz33q48w8o)

• 1 week FDP on academic excellence in Engineering Education- strategic approach
• International conference on communication and advanced computing.
• 1 week STTP on introduction to network security
• Two days FDP conducted in IIT HYDERABAD”
• 5 days FDP conducted in “K G Reddy college of Engineering and Technology, Hyderabad.
• 1 week FDP conducted in “K G Reddy college of Engineering and Technology, Hyderabad.
• National conference on advanced remote sensing in Andhra Pradesh
• National conference in “K G Reddy college of Engineering and Technology, Hyderabad

• II ^price in essay writing for Beed sub forest section.
• III price in first year diploma.
• II price in second year & third year diploma.
• Got I price in logo designing at MIT Aurangabad, Innovate Aura of creation event.
• II price in third year & final year BE.
• III university topper of BAMU Aurangabad.

•  Low power VLSI
•  Embedded system
•  IoT
•  Physical Disign
•  Digital Design

• Linear and Digital IC applications,V LSI design, Radar Systems,
  Digital logic Design, Switching theory and logic design, Linear IC’s, Digital System Design.

• Worked on communication protocols in R&D department
• Done a project on communication protocols using VHDL
• Worked on encryption and decryption of communication protocols
• Got hands on training on Xilinx vivado
• Design and Analysis of 16-bit Efficient Carry Select Adder

using Full Swing modified GDI Techniques:
Area, power and delay are important factors in VLSI design. In order to
reduce these factors several authors proposed several techniques, one of
such technique is Gate Diffusion Input (GDI). Although GDI technique
reduces area, it suffers from swing degradation problem. The conventional
GDI technique is modified in order to achieve full swing. Three different
approaches are proposed and 16 bit carry select adder is designed using
these models. Area, power and delay are compared.
Design and Simulation of Communication Protocols using VHDL:
VHDL modules are designed for I2C protocol, SPI protocol and UART
protocols. Vhdl code is designed and simulated using Xilinx ISE v10.2

•  Prosthetic five fingered hand for physically impaired individuals using EEG’s and Arduino”, JASC, ISSN NO: 1076-5131, Volume VI, Issue II, February/2019, Page No:731-735, https://app.box.com/s/8uha2il5uzjx7xu3fr9pvncj1c1781b5
• “Network function virtualization enabled architecture of IOT for operating room innovation center” ”, Journal of Applied Science and Computations JASC, ISSN NO: 1076-5131, Volume VI, Issue II, February/2019, Page No:801-805, https://app.box.com/s/kpou9lvfg2uxzoyig52mdc6ndh8ya6qw.
• “Neuroendoscopy Adapter Module Development for Better Brain Tumor Image Visualization”, www.jetir.org (ISSN-2349-5162), August 2018, Volume 5, Issue 8, 246-252. http://www.jetir.org/papers/JETIR1808932.pdf
• “CMOS instrumentation intensifier planning idea for low power sensor applications”, Journal of Applied Science and Computations JASC, ISSN NO: 1076-5131, Volume VI, Issue II, February/2019, Page No:674-679, https://app.box.com/s/6ze0te62ute46zcxyv48kbneepxbe3ki
• “A Phase Frequency Detector for a High Frequency PLL Design”, International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 6, page no.386-391, June-2018, Available :http://www.jetir.org/papers/JETIR1806055.pdf
• “Speaking System For Mute People Using Raspberry Pi”, International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 5, page no.679-685, MAY-2018, Available :http://www.jetir.org/papers/JETIR1805715.pdf
• “Design and analysis of vedic multiplier using full swing modified gate defused input method”, IJCRT, page 301-306, vol-6,Issue-1,December 2017.http://www.ijcrt.org/IJCRTNCES047.pdf.
• “Outline of re-enactment distinction CMOS Phase Frequency Detectors for rapid and low jitter PLL”, IJCRT, page 246-251, vol-6,Issue-1,December 2017. http://www.ijcrt.org/papers/IJCRTNCES038.pdf
• “Design and analysis of carry select adder using modified full swing GDI techniques” IJRASET page no. 67-72, vol-2 Issue 5, may 2016 http://www.ijraset.org/papers/IJRASET0155.pdf
• “Design and analysis of full adder using different low power techniques” American journal of computer science and information technology, vol 4 issue 1, may 2016
• “Comparative study and analysis of different low power design styles”, IJSER page no. 12-16,vol-1 jan-2016
• “design and analysis of 1-bit hybrid full adders” IJAR vol-1 Issue 2 jan 2016 page no.3-6.
• “Design and analysis of full adder using different low power techniques” Pubicon publication, page no. 16-19, April 2016.
• PAPERS REVIEWED AS REVIEWER
•  Neuroendoscopy Adapter Module Development for Better Brain Tumor Image Visualization”, JETIR1808932 Journal of Emerging Technologies and Innovative Research(JETIR), ISSN: 2349-5162 | Impact Factor: 5.87.
•  “A Phase Frequency Detector for a High Frequency PLL Design”, JETIR182966,Journal of Emerging Technologies and Innovative Research(JETIR), ISSN: 2349-5162 | Impact Factor:5.87.
•  “Processing And Analysis Of Digital images And Checking The Quality Of Data Captured”, JETIR18303, Journal of Emerging Technologies and Innovative Research(JETIR), ISSN: 2349- 5162 | Impact Factor: 5.87.

•  One month faculty induction training program by Teaching Learning Center IIT Hyderabad from 12th November 2018 to 5th December 2018.
• Attended 6 days FDP on “Academic Excellence in Engineering Education – Strategic Approach” conducted by KGRCET from 24th to 29th june 2019.
• Attended 6 days FDP on “VLSI circuits and systems” conducted in coordination with UGC HRDC.
• Attended 5 days FDP on “Digital VLSI design using verilog” conducted by CDAC and TASK
• Attended 2 days workshop on NPTEL videos and courses conducted by IIT Madras
• Attended FDP on Recent Trends in Engineering Education.
• Attended FDP on Out Come Based Education System.
• Attended FDP on Active Learning Methods.
• Attended Two National level Conferences at KGRCET

• Reviewer Board member in Journal of Emerging Technologies and Innovative Research(JETIR), ISSN: 2349-5162 | Impact Factor: 5.87, ID-113271
• Reviewer Board member in International Journal of Creative Research Thoughts (IJCRT) ISSN: 2320-2882. Member ID-113271

•  Conducted 2 days workshop on “IoT using Arduino”, in collaboration with NIT Surathkal
• NPTEL certificate for “VLSI Physical design”, Aug 2018
• CDAC certification for “Digital VLSI Design”, Dec 2017
• Won best paper in national conference NCESTFOSS held in KGRCET, Hyderabad.
• Won 2nd prize in PG technical symposium on 13th may 2016 in SDIT Mangalore.
• Conducted 2 days hands on training on “Introduction to Arduino and embedded system” in Secab engineering college, Bijapur.
• Guided 2 Project groups for “Smart India Hackathon 2017”
• Handled two days workshop on Xilinx ISE in MITE, Moodabidri.
• Handled three days workshop on Mentor graphics, in MITE, Moodbidri

•  “Rectangular Dielectric Resonator Antenna (RDRA) contributed to 5G technology”. Application No: 201921008506.
• “Parallelization of steady air-flow over cars with neural network”, Application No:201921008498.
• “Improved Time Complexity and Load Balance for DFS in multiple name node”, Application No: 201921008504.

• Microwave and engineering(MWE)
• Radar systems(RS)
• Electronic circuit analysis(ECA)
• Electronic devices and circuits(EDC)
• Digital signal processing(DSP)
• Switching theory and logic design(STLD)
• Analog Electronics(AE)

• Presented a paper in National Conference on Recent Trends In Engineering Education and Significance of Free  Open Source Software(NCESTFOSS-2017) on “OUTLINE OF REENACTMENT DISTINCTION CMOS PHASE FREQUENCY DETECTORS FOR RAPID AND LOW JITTER PLL” organized by KGRCET.( http://www.ijcrt.org/papers/IJCRTNC ES038.pdf )
• Presented a paper in National Conference on Recent Trends In Engineering Education and Significance of Free  Open Source Software(NCESTFOSS-2017) on “Design And Analysis Of Vedic Multiplier Using Full Swing Modified Gate Defused Input Method” organized by KGRCET. ( http://www.ijcrt.org/papers/IJCRTNCES047.pdf)

• Presented a paper in National Conference on Recent Trends In Engineering Education and Significance of Free  Open Source Software(NCRTEEFOSS-2016) on “VLSI implementation of fast addition using quaternary signed digit number system” organized by KGRCET.                                                                        ( http://ijiet.com/wp-content/uploads/2016/12/1130.pdf )

• Published the journal in International Journal Of Science Engineering and Technology(IJSET)  on  “An efficient implementation of automatic washing machine control system using verilog”( ISSN 2348-4098,Volume-2, Issue-7,Sept-Oct 2014,Pages:1575 -1578).                                             (http://www.ijset.in/wpcontent/uploads/2014/11/IJSET.1020141026.1011.2910_P_1575-1578.pdf )

• Published the journal in International Journal of Advanced Technology and Innovative Research(IJATIR) on “Visual cryptography for color images using error diffusion” (ISSN 2348-2370,Volume-6, Issue-3,April-2014,Pages:124-131). (http://www.ijatir.org/uploads/516324IJATIR843-18.pdf )

• Presented a paper in International Conference on Paradigms in Engineering& Technology(ICPET 2016) on “An efficient low power cross coupled SRAM using Schmitt trigger principle” organized by Methodist college of engineering and technology, Hyderabad.
• Published a paper in international journal of innovative technologies(IJITECH) on “Fall Detection and Observation System Over Linux Environment with IOT” (ISSN  2321-8665,Volume-03,Issue-06,August-2015,Pages: 0901-0904 ).                                                          ( http://ijitech.org/uploads/162534IJIT6191-165.pdf )

• Published a paper in international journal of innovative technologies(IJSETR) on ” Implementation Of A Home Embedded Surveillance Device with Majority Voting Mechanism” (ISSN  2319-8885,Volume-04,Issue-50,December-2015,Pages: 10869-10872). (http://ijsetr.com/uploads/365142IJSETR8016-1875.pdf )

• Published a paper in International Journal of Scientific Engineering and Technology Research(IJSETR) on “Mathematical Modeling And FPGA Implementation of Particle Swarm Optimization” (ISSN 2319-8885,Volume-2, Issue-17,November-2013,Pages:  2003-2007). (http://www.ijsetr.com/uploads/643215IJSETR496-18.pdf)

Papers reviewed as Reviewer

• Reviewer in Fourth International Conference On Transformations in Engineering Education (ICTIEE-2017).
• Reviewer in Fifth International Conference On Transformations in Engineering   Education (ICTIEE-2018).

• Faculty Development Program on EFFECTIVE TEACHING AND LEARNING at KGRCET ,held on 14^th may to 26^th may,2018.
• Faculty Development Program on EFFECTIVE TEACHING AND LEARNING at KGRCET ,held on 4^th dec to 9^th dec,2017.
• Faculty Development Program on VLSI SYSTEM DESIGN at MLR Engineering College, held on 28^TH November 2015.
• Staff Development Program on FULL CUSTOM IC DESIGN &FPGA DESIGN FLOW at VNRVJIET, held on February 2012.
• Staff Development Program on DSP PROCESSOR ARCHITECTURES AND PROGRAMMING at VNRVJIET, held on February 2012.

• Got appreciation certificate from The Institution of Electronics and Telecommunication Engineers(IETE) for organizing a competition on “Robotics and its Applications”.
• Got appreciation from Texas instruments for being the organizer of DrishTI Online contest 2017 in association with Digital Shark Technology and KG Reddy College of Engineering and Technology.
• Successfully completed IUCEE EPICS Design Thinking Course(August 2017 to January 2018)
• Presented a paper in National Conference on Advanced Innovations in Engineering Technology and Management (AIETM-2014) at JBREC and got first prize.
• Got second position in M.TECH project in VLSI system design(ECE).
• Secured 95 percentile in GATE-2011.
• Got gold medal for obtaining the 300 out of 300 marks in Intermediate Mathematics subject.
• Participated in Mathematics quiz and got first prize.
• Got school first in SSC.

• Electromagnetic theory.
• Transmission line.
• Microwave engineering.
• Wave propagation

• Saida and M. Padmaja “Design and implementation of high speed and low power multiplier using Urdhwa Tiryagbhyam Sutra” (IJERT)-2014, ISSN: 2278-0181, Vol.3 Issue 3, March –2014.  https://www.ijert.org/download/8969/design-and-implementation-of-high-speed-and-low-power-multiplier-using-urdhwa-tiryagbhyam-sutra

• Saida. “An efficient VLSI architecture for software define radio by using of montium processing tile”. IJMETMR-2015, ISSN:2348-4845. Volume 2, issue No: 7(July). http://www.ijmetmr.com/oljuly2015/ASaida-380.pdf

• Saidaand Md.Asif. “Analysis of MSA, paraboloid and lens antennas using SHF for wireless communication devices” 2017 IJCRT National Conference Proceeding NCESTFOSS Dec 2017 ISSN:2320-2882http://www.ijcrt.org/papers/IJCRTNCES045.pdf
• Saida and Md. Asif. “Short Range Voice Communication Using Bluetooth 2017 IJCRT National Conference Proceeding NCESTFOSS Dec 2017 ISSN:2320-2882. http://www.ijcrt.org/papers/IJCRTNCES035.pdf

• “Reliable Antenna Design for 5g Communication” International Journal of Research Volume 7, Issue VII, JULY/2018 ISSN NO : 2236-6124 http://ijrpublisher.com/gallery/59-july-2018.pdf 
•  Saida and Md. Asif. “Future Technology for Mobile CommunicationSystem” JASC:Volume VI, Issue II, February/2019 ISSN NO: 1076-5131 Page No:647
• A. Saida and Md. Asif. “Executing Multiple Identities in IMS/VOLTE Networksutilizing Implicit Registration”JASC: Volume VI, Issue II, February/2019 ISSN NO: 1076-5131 Page No:736

• Attended TWO days’ Workshop on “Research Aspects in Information Security”, on Dec-2012. At JNTUHCE, Hyderabad.
• Workshop Attended on TLC conducted by IIT HYDERABAD- APRL-2016,
• Workshop Attended for Faculty Development Program on Effective Methods of Teaching”, on AUG-2018, KGRCET, Hyderabad.
• Workshop attended on “DST SPONSORED TWO WEEKS SHORT TERM TRAINING PROGRAM ON INTERNET OF THINGS” held during 17^th to 29^th June 2019. at department of ECE, ANURAG group of institutions, Hyderabad,

• Attend “First National Conference on Recent Trends in Engineering Education and Significance of Free Open Source Software”, NCRTEEFOSS-2016 in Dec-2016of India.
• Attend “Fourth International Conference on Transformations in Engineering Education”, ICTIEE-2017, Hyderabad. Jan-2017
• Attend “National Conference on Engineering, Science, Technology in Industrial Application and Significance of Free Open Source Software Organized by K G REDDY College of Engineering & Technology & IJCRT.ORG 2017” NCESTFOSS Dec 2017
• Attend “International Conference On Communication And Advanced Computing, Organized by K G REDDY College of Engineering & Technology & JASC.ORG 2018” ICOCAC-DEC 2018.

• VLSI System Design
• Antenna Design
• Wireless Communications

•  Electronics Devices and Circuits
•  Electronics Circuit Analysis
•  Switching Theory and Logic Design
•  Probability Theory and Stochastic Process
•  AnalogCommunications
•  DigitalCommunications
•  Linear & Digital IC applications
•  Electromagnetic Waves and Transmission Lines
•  Antennas and Wave Propagation
•  Microwave Engineering
•  Digital Signal Processing
•  Cellular Mobile Communications

• Digital system Design, Low power VLSI, Design for Testability, Microwave Antenna Theory & Design, EMI/EMC.

(Academics)

• T Gayatri , V.K Sharma , N. Anveshkumar “A Survey on Conceptualization of Cognitive Radio and Dynamic Spectrum Access for Next Generation Wireless Communications” JASC: Journal of Applied Science and Computations, ISSN NO: 1076-5131, Volume VI, Issue II, February/2019, PP.744-751.
• T. Gayatri and G. Srinivasu “A research on vertical Handoffs for next   generation wireless networks” 1st National conference (NCRTEEFOSS) conducted in K G Reddy College of Engineering and Technology in December 2016 .http://ijiet.com/wp-content/uploads/2016/12/1127.pdf
• T. Gayatri and G. Srinivasu “A research on Ultra WideBand antennas for wireless communications” 2nd National conference (NCESTFOSS) conducted in K G Reddy College of Engineering and Technology in December 2017 . http://www.ijcrt.org/papers/IJCRTNCES043.pdf.
• T. Gayatri, Nehru Jarpula and Rajaiah “Design and Implementation of a Low Power 32 Bit Unsigned Multiplier using CLAA and CSLA” National Conference on Advancements and Innovations in Engineering, Technology and Management conducted in Joginpally B R Engineering College in March 2014. http://www.scholarlyexchange.org/ojs/index.php/jie/article/view/13577/8913

•  Completed a Short term course on “Design and Analysis of Antennas in Cylindrically and Spherically layered media” at Indian Institute of Technology (IIT Kharagpur) in June 2019.
  Workshops attended:
• Participated in 1 Week “Workshop on Electromagnetics and Antenna Design”  at Indian Institute of Technology (IIT Varanasi) in June 2019.
•  Participated in 1 day workshop on “Recent Innovations in Cognitive Radio and
  Software Defined Radio” at Osmania University in December 2018.
•  Participated in 1 Week National level workshop on “Designing of Antennas and
  Microwave Components using Computer Simulation Technology Studio Suite and Antenna Magus” at Gokaraju Rangaraju Institute of Engineering and Technology in July 2018.
•  Participated in 2 days workshop on “Design and Implementation of Student centered Learning” at KGRCET in January 2016.
•  Attended 2 days ISTE workshop on “Research methods in Educational Technology” at JBREC in February 2013.
  FDPs Attended:
•  Participated in 1 week Faculty Development Program on “ Design and Analysis of Antennas for 5G Wireless Applications” at Spoorthy Engineering college in July2019.
•  Participated in 1 week Faculty Development Program on “Academic Excellence in Engineering Education- Strategic Approach” at KGRCET in June 2019.
•  Successfully completed the course on “Introduction to Research” conducted byNPTEL– AICTE Faculty Development Programme during Aug-Sep 2018.
•  Participated in 1 week Faculty Development Program on “Research Methodologies and Assessment Tools” at Spoorthy Engineering college in June 2018.
•  Participated in 2 week Faculty Development Program on “ Effective Teaching andLearning and Technical Knowledge & Skill Enhancement Programme” at KGRCET in May 2018.
•  Participated in 1 week Faculty Development Program conducted by Center for Engineering Education Program at KGRCET in December 2017.
•  Participated in “Doctoral Research Symposium” at Guru Nanak Institutions in July2017.

• Attended International Conference on Communication and Advanced Computing (ICOCAC 2018) at KGRCET in December 2018.
• Attended 2nd National Conference on Engineering, Science, and Technology in industrial applications and Significance of Free Open Source Software’s at KGRCET in December 2017.
• Attended 1st National Conference on Recent Trends in Engineering Education and Significance of Free Open Source Software’s at KGRCET in December 2016.
• Participated in Women student congress in Association with WIE-R10 & WIE society, IEEE Hyderabad Section in July 2008.

•  Successfully completed the 12 Week course on “Antennas” with an Elite score conducted by NPTEL Online Certification during Jan-Apr 2019.
•  Successfully completed the 8 Week course on “Introduction to Research” with an Elite score conducted by NPTEL Online Certification during Aug-Sep 2018.
•  Successfully completed the 8 Week course on “Analysis and Design Principles of
  Microwave Antennas” conducted by NPTEL Online Certification during Aug-Sep 2018.
•  Successfully completed the 12 Week course on “Microwave The

• I received Excellence in Teaching Award in 2012 in KITE engineering college for
  Women.
•  NCC B Certificate Holder.
•  Completed B.A in Hindi literature.
•  Completed B.A in South Indian Carnatic Vocal Music.

•  Digital Electronics.
• Digital Image Processing
• Communication

• SWITCHING THEORY AND LOGIC DESIGN
• BASICS OF ELECTRICAL AND ELECTRONICS ENGINEERING
• DIGITAL DESIGN USING VERILOG
• ELECTRONIC CIRCUITS
• PROBABILITY THEORY AND STOCHASTIC PROCESS
• ANTENNA THEORY AND WAVE PROPOGATION
• RADAR SYSTEMS

• CMOS Digital Integrated Circuit Design

(Academics)

•  IOT based Bridge monitoring and analysis
• Smart E-basket
• Gesture Recognition
• E Farming
• Image Retrieval with data base security
• Automatic Vehicle In and Out detection using MATLAB and ARDUINO
• Plant Monitoring System

• Paper entitled “Hand Gesture based Interface for Aiding Visually Impaired”,
  Published in IJCRT journal on Recent Trends In Engineering Education and Significance of Free Open Source Software(NCRTEEFOSS-2016) at National Conference organized by KGRCET.
• Paper entitled “Design, Analysis,Implementation and Synthesis of 16 bit Reversible ALU by using Xilinx 12.2” in Int. Journal of Engineering Research and applications.
•  Paper entitled “Vehicle Tracking and Fuel Level Identifying Based on Android” in IJCRT journal on recent trends In Engineering Education and Significance of Free Open Source Software (NCESTFOSS-2017) at National Conference organized by KGRCET.
•  Paper entitled “Content identification from regular scene pictures: towards a
  framework for visually impaired people” in IJCRT journal on recent trends In
  Engineering Education and Significance of Free Open Source Software (NCESTFOSS-2017) at National Conference organized by KGRCET
• Papers reviewed as Reviewer
  Reviewer in Fifth International Conference on Transformations in Engineering Education (ICTIEE-2018).

• Faculty Development Program on EFFECTIVE TEACHING AND LEARNING at KGRCET, held on 14th may to 18th may, 2018.
•  Attended National Conference on Recent Trends In Engineering Education and Significance of Free Open Source Software (NCRTEEFOSS-2017).
•  FDP programme sponsored by National Science & Technology Entrepreneurship Development Board (NSTEDB) Ministry of Science & Technology, Govt.of India on Entrepreneurship awareness
  (2017).
•  Attended National Conference on Recent Trends In Engineering Education and Significance of Free Open Source Software(NCRTEEFOSS-2016)
•  Attended workshop on “Hands on Experience on emerging trends in VLSI” at CMRIT College.

• I won First prize for paper presentation in NCRTEEFOSS-2017 at K G Reddy College of engineering and technology.

• Vijaya Bhasker Reddy “SPEAKING SYSTEM FOR MUTE PEOPLE USING RASPBERRY PI”, International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 5, page no.679-685, MAY-2018, Available :http://www.jetir.org/papers/JETIR1805715.pdf. 
• Vijaya Bhasker Reddy, “Implementation of A Home Embedded Surveillance Device with Majority Voting Mechanism” in 2015.           ( ijsetr.com/uploads/365142IJSETR8016-1875.pdf).
• Vijaya Bhasker Reddy, A.Deepika –“Vehicle Tracking And Fuel Level Identifying Based On Android”, ISSN: 2320-2882, Volume 6 Issue 1 on 2017. ( www.ijcrt.org/papers/IJCRTNCES040.pdf)
• Vijaya Bhasker Reddy , A.Deepika, “Content identification from regular scene pictures: towards a framework for visually impaired people”, ISSN: 2320-2882,Volume 6 Issue 1 on 2017.(www.ijcrt.org/papers/IJCRTNCES037.pdf) 
• Vijaya Bhasker Reddy “Intelligent power Management in buildings Using Zigbee” in ISSN: 2319- 1058 on 2016.                       (ijiet.com/wp-content/uploads/2016/12/1126.pdf) 
• Vijaya Bhasker Reddy, “CMOS Instrumentation Intensifier planning idea for Low Power Sensor Applications”.
•  Vijaya Bhasker Reddy, M. Sayeeduddin Habeeb, ”Execution and Performance Analysis of Real Time Scheduling Algorithms for Embedded Applications”.

• Participated in one day workshop conducted by IEEE Hyderabad on “UAV’s and Drones” at Begumpet, Hyderabad,S.
• Attended a two day workshop on e-yantra (Robotics), At DIET college, Vishakhapatnam, Conducted by IIT Mumbai, Sponsored by MHRD.

Workshops Conducted:

• A two day workshop conducted on “IOT Using Arduino” at KGRCET, Moinabad, Hyderabad, T.S

• Attended FDP on Recent Trends in Engineering Education.
• Attended FDP on Out Come Based Education System.
• Attended FDP on Active Learning Methods.
• Attended Two National level Conferences at KGRCET.
• Participated in “Short Term Training Program through ICT Mode on Introduction to Network Security Organized by NITTTR Kolkata”.
• Attended an International Conference (ICOCAC) at KGRCET.
• Successfully completed an Induction Training Program Conducted by Teaching Learning Center IIT Hyderabad.
• Attended FDP on “Academic Excellence in Engineering Education-Strategic Approach.

• NPTEL Awarded Elite Certificate for the Successful Completion of course Microprocessors and Microcontrollers.

• Soft Computing Techniques
• Biomedical Engineering

• Neural Networks
• Fuzzy Logic.
• Soft Computing Techniques.
• Digital System Design
• Control System
• Computer Network
• Satellite Communication.

• International Conference:15
• International Publications: 45

Google Scholar link:
https://scholar.google.com/citations?user=vLI_olsAAAAJ&hl=en

• Five day workshop on “Big Data & Image Processing on Machine Learning” on 27th – 31st May 2019 at NIT, Warangal

• Three days workshop on “Networking” on 25th -27th Nov 2018 at GHRIET, Nagpur
• Two days workshop on “Machine Learning” on 16th -17th Dec2017at VNIT, Nagpur
• Short term course on “Effective Research Methodology”on 5th -16thOct 2015 at PIET, Nagpur. Two days workshop on “Wireless Mobile and Sensor Network using Netsim” on 11th -12th December 2015 at St. Vincent Palloti College of Engineering & Technology, Nagpur.
• Two days national workshop on “Research Methodology and StatisticalModelling”on 15th -16th June 2013 at BDCOE, Wardha.
• Four days core faculty training program on “PLC and SCADA” under IIPC on 19th -22th at SBJITMR, Nagpur.
• One day workshop on “Curriculum Development” for B.E. 3rd Semester for the subject of Electronics Engineering on 1st August 2013 at SBJITMR, Nagpur
• One day workshop on “Curriculum Development” for B.E. 7 th Semester for the subject of Electronics Engineering on 27th August 2015 at PBCE, Nagpur.
• Two days Workshop “Wireless Physiological Monitoring Systems and Neurofeedback-Biofeedback System” on 29th -30th August 2011at GHRCE, Nagpur.

Workshops/Guest Lectures delieverd

• “PLC & SCADA”at G.H.R.C.E., Nagpur.
• “PCB DESIGN AND TESTING” at B.D.C.O.E, Wardha.
• “ROBOTICS AND SENSORS” at JNL (ACD-II), Butibori,Nagpur
• “Neural Network” at SDMP, Nagpur
• “Carrier Guidance in Technical field” at P. R. Patil Institute of Polytechnic,Wardha
• “Modelling of Fuzzy logic and Neural Network” at SDMP, Nagpur
• Invited as Judge for Interview and Group Discussion by Tirpude College of Management, Nagpur

• Invited as Judge for state level project competition by S.B. Jain College of Engineering   Management & Research, Nagpur

• Working as a Reviewer of “IEEE Transaction of Electronics”.
• Working as a Reviewer of “Advances in Science, Technology and Engineering Systems Journal (astesj) .
• Working as a Reviewer of “Int. Journal of Biomedical Engineering (Inderscience).”
• Working as a Reviewer of “Neural Computing and Applications (Springer)”.
• Working as an Editor for MAT Journals

• ISTE (LM 114623)
• IETE (AM 237907)
• IAENG (M207333)
• ISRD (F3140901046)

• “Brain Tumor Classification and Detection using Neural Network”, Published in Scholars’ Press,ISBN:978-3-330-65105-5, 2017.
• “Biomedical Signal Processing: Soft Computing Techniques”, Published in Lambert academic publication, ISBN:978-613-7-34016-5,2018.
• “Video shot boundary detection techniques”, Published in Scholars’ Press, ISBN 978-620-2-31253-0, 2018

• “Optimization of Generalized Regression Neural Network (GRNN) using soft-computing methods”, Indian Patent office, Application No.201621030617A, Date of filing of Application 7th Sept-2016.
• “Performance Optimization of Neural Network using GA Incorporated PSO”, Indian patent office, Application No.201621038040A, Date of filing of Application 7th Nov-2016.

• Paper on “Nanotechnology and it’s applications in medical field” selected in International Level Conference at Rayat Institute of Engg & Inf. Tech, Railmajra, near Ropar on 26th August 2006.
• Paper Presented on “Nanoboats in Medicine” at International Conference at Anuradha Engineering college Chikhli on 3rd March 2007.
•  Paper Presented on “Adaptive image contrast enhancement” at International Conference at Anuradha Engineering college Chikhli on 21 Feb, 2008.

Paper Presented on “Adaptive filter for system identification” at International Conference at Anuradha Engineering college Chikhli on 21 Feb, 2008.Papers

Published in International Journals:

• Anil N. Rakhonde, Dr. Pramod B. Patil, “Detection of Malaria Parasite in Thin Blood Smears by using Artificial Neural Network”, published in International Journal on Recent and Innovation Trends in Computing and Communication (IJRITCC), Volume 4, Issue 5 (ISSN: 2321-8169), pages 173-176, May 2016 (ISSN: 2321-8169, Available at http://www.ijritcc.org) Impact factor 5.837 .
•  Anil N. Rakhonde, Dr. Pramod B.Patil, “Automated Malaria Parasitemia Estimation from Thin Blood Smear Images”, published in International Journal of Current Engineering and Technology, Volume 6, Issue 6, pages 2228- 2230, 2016 (E-ISSN 2277- 4106, P-ISSN 2347- 5161 Available at http://www.inpressco.com) Impact factor 6.125.
•  Anil N. Rakhonde, Dr. Pramod B.Patil, “ Malaria Parasite Species Recognition using Artificial Neural Network”, published in International Journal of Innovative Research in Computer and Communication Engineering, Volume 4, Issue 12, pages 21826-21828, 2016 (E-ISSN 2320-9801, P-ISSN 2320-9798 Available at http://www.ijircce.com) Impact factor 6.577

• Three weeks STTP on “ Development Programme for Self Employment” Conducted by MCED & DIC, Buldana during 2 Dec 1991 to 23 Dec 1991.
•  ISTE Program on “In House Induction Training for Teachers” at Anuradha Engineering College, Chikhli, (13th -15th October 1997).
•  ISTE Program on “Personality Development” at Anuradha Engineering College, Chikhli, (6th -7th February 1999).
•  Two week S.T.T.P. on “Computer Applications and Modern Techniques in Manufacturing Process” at Anuradha Engineering College, Chikhli, (24th March to 5th April 2003).
•  One week induction training program “C Programming Language- A Graphic Oriented Approach” Anuradha Engineering College, Chikhli,( 21th -27thApril2003).
•  Six days short term course, sponsored by ISTE, on “Application of Optimization Technique in Science and Engineering” at Anuradha Engineering College, Chikhli, (29th March to 3rd April 2004).
•  Paper on “Nanotechnology and it’s applications in medical field” selected in National Level Conference at Rayat Institute of Engg & Inf. Tech, Railmajra, near Ropar on 26th August 2006.
•  Paper Presented on “Nanoboats in Medicine” at International Conference at Anuradha Engineering college Chikhli on 3rd March 2007.
•  Paper Presented on “Adaptive image contrast enhancement” at International Conference at Anuradha Engineering college Chikhli on 21 Feb, 2008.
•  Paper Presented on “Adaptive filter for system identification” at International Conference at Anuradha Engineering college Chikhli on 21 Feb, 2008.
•  Participated in entrepreneurship awareness camp organized at Anuradha Engineering College, Chikhli by MCED & DIC during 9th March-11th March 2011.
•  Two week short term training programme, sponsored by ISTE on “MATLAB & its application in medical and communication Engg.” at Prof. Ram Meghe Institute of Technology and Research, Badnera during 23 March 2011-2April 2011.
•  Attended one day workshop on “Academic Performance Indicator (API)” conducted by Academic staff college, SGBAU, Amravati on 23 June, 2011.
•  Attended two day workshop on “Research Methodology & Statistical Modelling” conducted by Bapurao Deshmukh College of Engg. Wardha during 27th & 28th Oct ,2012.
•  Attended two day ISTE workshop on “Akash for education” conducted by IIT, Mumbai during 10th & 11th Nov, 2012.
•  Attended one day orientation programme on “Curriculum of G-scheme sponsored by MSBTE, Mumbai & held at NIT Polytechnic, Nagpur on 29th Dec. 2012.
•  Attended two day ISTE workshop on “Data base Management System ” conducted by IIT, Mumbai during 21st to 31st May, 2013.
•  Attended two week ISTE workshop on “Computer Programming ” conducted by IIT, Mumbai during 20 May to 21 June, 2014.
•  Attended two week ISTE workshop on “Computer Networking ” conducted by IIT, Mumbai during 28 May to 5 July, 2014.
•  Attended two week ISTE workshop on “Cyber Security ” conducted by IIT, Mumbai during 10 July to 20 July, 2014.

1. Worked as a Coordinator for Internal Examination, Anuradha Engineering
   College, Chikhli, during the session 1995 – 96 & 1996 – 97.
2.  Worked as a Chief Editor of “ANURANG” Annual magazine, Anuradha Engineering College, Chikhli. during the session 2005-06 & 2006-07.
3. Worked as Session Chair in “HERTZ-08” A National Level Technical Paper Presentation at Anuradha Engineering College, Chikhli held on 26th March 2008.
4. Worked as Head of Department, Electronics & Telecommunication Engineering Department at Anuradha Engineering College, Chikhli.
5. Worked as a Chief Coordinator for HERTZ-2011 A National Level Technical Paper Presentation at Anuradha Engineering College, Chikhli held on 14th March, 2011.
6. Worked as an Incharge of Admission Cell for first year and Direct Second year Engineering admissions Centralized process at Anuradha Engineering College, Chikhli, during the session 2007– 08, 2008-09, 2009-10, 2010-11 and 2011-12.
7. Worked as a Coordinator for IIT remote center at Siddhivinayak Technical Campus, Khamgaon from June 2012.

• International Journals:
  “ English and Interpersonal skills to Engineering Students “
  In ICOMACE 2018.

•  Attended various FDPs conducted by MRIET, VJIT, JBIET
•  Attended a 2 -day International Conference on ME & CE (ICOMACE) , 20th & 21st December 2018, held at KGRCET , Moinabad, Hyderabad , Telangana.
•  Member for the BOS-English from 2015 to 2018 at JBIET.
•  Organised Intensive Teaching Workshop at JBIET for 2 consecutive years i.e. 2016 & 2017
•  Organised 1 week FDP at JBIET from 5th Dec to 9th Dec 2016

•  Awarded 5 times Best Faculty Award for getting 100% results in B.Tech 1st year.
•  Received an Appreciation Letter for Imparting Quality Education to the 1st year B.Tech. students.
  ⦁ Trained as a Life Skills Coach in Train The Trainer Program.

•  “ To bring a Paradigm shift in the Teaching of English Language at UG level. “
  In ICOMACE 2018.

• Workshops/National/International conference attended:
  Attended an FDP on “Student Induction” conducted by AICTE , during 9th to 11th May 2019.
•  Attended a 2 -day International Conference on ME & CE (ICOMACE) , 20th & 21st December 2018, held at KGRCET , Moinabad, Hyderabad , Telangana.
  ⦁ Chairperson for the BOS-English from 2012 to 2018 at JBIET.
•  Organised Intensive Teaching Workshop at JBIET for 2 consecutive years i.e. 2014 & 2015.
•  Organized a National Conference on SIM 07 at Nehru Auditorium-GEC.
•  Organised 1 week FDP at JBIET from 5th Dec to 9th Dec 2016.
•  Book reviewed : Reviewed a book by Dr. J. P. Sharma on the title COMPREHENSIVE ENVIRONMENTAL STUDIES published by Laxmi publications.
• Attended a 15 days workshop on Institutional Building for Heads of MUSLIM MINORITY MANAGED INSTITUTIONS , New Delhi , Oct-Nov 2008 Organised by NEUPA.
• Editing Chapters in books published by Oxford University Press.

•  Awarded 7 times Best Faculty Award for getting 100% results in B.Tech 1st year.
• Received an Appreciation Letter for Imparting Quality Education to the 1st year B.Tech. students.
• Reviewed a book : Reviewed a book by Dr. J. P. Sharma on the title COMPREHENSIVE ENVIRONMENTAL STUDIES published by Laxmi publications.
• Trained as a Life Skills Coach in Train The Trainer Program.

•  “Particle Swarm Optimization for the Design of High Diffraction Efficiency Holographic Grating”, A.K. Tripathy, S.K. Das, M. Sundaray and S.K. Tripathy, American Journal Of Computer Science and Engineering Survey, 3, 01, 2349-7238 (2015).
• “Sensing application of an optical fiber dip coated with LEEH capped ZnTe QDs”, Madhulita Sundaray, Chapala Das, Sukanta Kumar Tripathy, Material Science Poland, 34(3), 2016, pp. 665-668.
• “FDTD analysis of diffraction efficiency in a hologram for application in optical fiber communication ”, M. Sundaray, S.K. Tripathy, C. Das , Optik ,154 , 325–330,(2017) .

•  “Design of an efficient Holographic Polarizer using PSO”, International Conference of Optics and Photonics-2015, Organiged by Optical Society of India, Calcutta University, Calcutta.
• “Effect of ZnTe QD coating length on the spectral characteristic of optical fiber” National Conference on Device and Circuit -2016, N.I.S.T, Berhampur.
• “Sensing application of an optical fiber dip coated with LEEH capped ZnTe QDs”International Conference on Frontiers in Materials Science and Technology-2015,N.I.S.T, Berhampur.
• “PSO based optimization for Diffraction Efficiency in a Holographic Coupler”,National Seminar on Recent Advances in Physics-2014,Berhampur University, Berhampur.

• ‘Decomposition of 2-propanol on Co1+xAl2-xO4 System’, I.A.P.S. Murthy and C.S. Swamy, Catal. Lett. 27 (1994) 103.
• ‘Catalytic Behaviour of NiAl2O4 Spinel on Hydrogen Treatment’, I.A.P.S. Murthy and C.S. Swamy, J. Mater. Sci., 28 (1983) 1194.
• ‘Studies on Hydrogen Storage Alloy Mg2Ni – Catalytic Activity and XPS’, I.A.P.S. Murthy and C.S. Swamy, Indian J. Chem., 29A (1990) 1101.
• ‘Investigation on the Oxidation Behaviour of Mg Containing Intermetallics’ I.A.P.S. Murthy, J. Christopher and C.S. Swamy, Thermochim. Acta, 164 (1990) 191.
• ‘Intermetallics as Potential Hydrogenation-dehydrogenation Catalysts’, Paper presented at the Second European Conference on Catalysis, held at Berlin Germany, 1989.

• Organic chemistry
• In-organic chemistry, Physical chemistry
• Analytical chemistry

Formulations

2^nd B.Sc Organic, In organic, Physical chemistry, Engineering chemistry, Environmental Science, Environmental Engineering, Disasters management

• Development and validation of dissolution test for Tamsulosin Hydrochloride Pellets, Oriental Journal of Chemistry, Vol.24 (3), 1049-1052(2008)
• Drug Release method by HPLC for Orlistat pellets 50.0%, Material science Research India Vol.5 (2), 499-502(2008)
• Reverse Phase High performance Liquid Chromatographic Determination of Orlistat Pellets 50%, Rasayan J.Chem, Vol.1, No.3 (2008), 636-638
• Dissolution test for Omeprazole Pellets 8.5 %( High dissolution): Optimization and Statistical analysis, Rasayan J.Chem, Vol.1, No.3 (2008), 618-619
• Estimation of venlafaxine in commercial dosage forms using simple and convenient spectrophotometric method, Rasayan j.Chem, Vol.2, No.2 (2009), 276-279
• Estimation of primidone in commercial dosage forms using a simple and convenient HPLC method, Rasayan j.Chem, Vol.2, No2 (2009), 297-299
• Taste masked Pharmaceutical composition for ciprofloxacin hydrochloride pellets, Rasayan j.Chem, Vol.2, No.2 (2009), 312-314
• Determination of Epinastine Hydrobromide Assay by potentiometric method, Rasayan j.Chem, Vol.2, No.2 (2009), 361-363
• Determination of Flubiprofen pellets 57% using drug release method by UV, Rasayan j.Chem, Vol.2, No.2 (2009), 418-420
• Estimation of Diclofenac Sodium pellets (Extended release) in commercial dosage forms using a simple and convenient spectrophotometric method, Rasayan j.Chem, Vol.2, No.2 (2009), 488- 490
• Drug Release method by HPLC for Tamsulosin Hydrochloride 0.2% and Tolteerodine tartrate 0.2% Combination Pellets ,International Journal of chemical engineering research,ISSN 0975- 6442, Volume 1,Number 2(2009),pp.155-159 (ripublication.com/ijcher.htm)
• Determination of Tamsulosin Hydrochloride 0.2% and Tolteerodine tartrate 0.2% Combination Pellets by RP HPLC method. Research journal of Pharmaceutical, Biological and chemical Sciences, Volume 1, Issue 1, page 136
• Dissolution profile of phenylephrine hydrochloride pellets,Journal of chemical and Pharmaceutical research, 2009, 1(1)257-260
• Dissolution Test Method for Mesalamine Pellets 90% and Dissolution Test Method for Cyclobenzaprine Hydrochloride Pellets10%, BRIG – National Technical Fest (30-3-2012)
• Estimation of IsoAmyl-2-CyanoAcrylate Purity by Gas Chromatography, B.C.K.Reddy ¹ , T.Srinivasarao² *, Latika Lokesh kumar³ , G.Naresh Reddy⁴,Am. J. PharmTech Res. 2017; 7(2) ISSN: 2249-3387
• Case study on consumption of carbon and it Importance, Vasantha Laxmi, T.Srinivasarao, International journal of basic and applied research volume-7 number 10, Prgathi
• HPLC Method for the assay determination of Lansoprazole Pellets dosage forms , T. Srinivasarao* 1 , M. Vasanthalaxmi² and G. Naresh Reddy³ European Journal of Biomedical and Pharmaceutical Sciences ISSN 2349-8870 Volume: 4 Issue: 12 XX-XX Year: 2017
• Assay Determination of Rabeprazole Pellets Dosage forms by HPLC, Srinivasarao.Tumati1, Revathi. A 2 , Vekanna.R, International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064.
• Dissolution test method and HPLC analysis for Lansoprazole pellets Dosage forms. Venkanna.R1, Srinivasarao.Tumati2, A.Revathi3 ,International Journal of Technical Innovation in Modern Engineering & Science (IJTIMES) Impact Factor: 5.22 (SJIF-2017), e-ISSN: 2455-2585 Volume 4, Issue 08, August-2018
• HPLC Method for Determination of Impurity profile in Ibuprofen 200mg and Methocarbamol 500mg caplets Srinivasrao.Tumati1*, B.C.K Reddy*, Srinivas Rao .Rayapati, 2 venkanna .R3 International Journal of Scientific Research and Review, Volume 7, Issue 11, 2018
• Formulations and Analytical Method Developments for Poor Soluble Drugs: A Review on Applications of Nano Chemistry .Srinivasarao.Tumati*, Srinivasarao.Rayapati , Venkanna.R , Naveen Reddy. Thuniki. International Journal of Research in Advent Technology, Special Issue, December 2018  International Conference on Mechanical and Civil Engineering (ICOMACE-2018) E-ISSN: 23219637Available online at ijrat.org
• Dissolution test Method and HPLC analysis for Pantoprazole Pellets dosage forms. Srinivasarao.T*, Srinivasarao.R¹, B.C.K reddy², Venkanna.R ³, 2019 JETIR  April 2019, Volume 6, Issue 4

• Long Term Measurement of Surface Ozone and Its Precursor’s at Hyderabad – a Tropical Urban Site Venkanna R¹, A. G. Rao², Y.V. Swamy³. Srinivasrao.Tumati⁴. International Journal of Research in Advent Technology, Special Issue, December 2018 International Conference on Mechanical and Civil Engineering (ICOMACE-2018) E-ISSN: 2321-9637

• 3 Days FDP program “on Student induction” organized at institute of Aeronautical engineering, Hyderabad from 09-05-2019 to 11-05-2019.
• “INTERNATIONAL CONFERENCE ON MECHANICAL AND CIVILENGINEERING-2018-K.G REDDY COLEEGE OF ENGINEERING AND TECHNOLOGY, MOINABAD, HYDERABAD.

• SHRI JAGDISHPRASAD JHABARMAL TIBREWALA UNIVERSITY APPROVED SUPERVISOR FOR PH.D PROGRAMME.
• ASSOCIATE EDITOR OF INTERNATIONAL JOURNAL OF ACADEMIC RESEARCH AND DEVELOPMENT.
• EDITORIAL BOARD MEMBER OF EUROPEAN JOURNAL OF BIOMEDICAL AND PHARMACEUTICAL.
• EDITORIAL BOARD MEMBER OF Editorial Board Member of World Journal of Pharmacy and

• Trained students to obtain placements in reputed companies
• Conducted the Industrial training programs for B-pharmacy and M-pharmacy, M.Sc students

“Formulations and Analytical Method Development for Poor Soluble Drugs-Applications of Nano chemistry to Pharmaceutical Industry”

Department of science and Technology ,Technology Bhavan, New Mehrauli Road, New Delhi-110016

• N.Gayathri “Distance between n number of points” (2016 manuscript under preparation).

•  Attended Workshop in Graph theory.
• A poster entitled Distance between n number of points was presented at National Conference 2016.

•  Best Faculty Award in 2017 in MLRIT.
• Highest Pass Percentage in Computational Mathematics 93%.

• On some fixed point theorems through Pseudo contractive mappings –IJMAnalysis.
• “On some fixed point theorems through contractive maps” –IJPAM
• A Survey on development of Fixed point theory.-IJAERD
• A Genralized fixed point theorem of Pal and Maiti- IJAERD
• On common fixed point theorem of weak** commuting operators- IJMArchive

⦁ On a generalized common fixed point theorem of Weak** commuting maps in 2- metric space

•  An Extension of Khan’s fixed point theorem in APSMS
•  On a Generalized Common Fixed Point Theorem for Weak ** Commuting Maps in 2-metric in OU

• Attended a 18 day MHI training certification course for the Phase 2 IWSPP project of the Rabigh Power Plant conducted by Mitsubishi Heavy Industries at Rabigh, Saudi Arabia.
• High & Medium Voltage Substation Technology Workshop, conducted by ABB, Jeddah Saudi Arabia.
• Attended International Conference on Nano-Technology at King Abdul Aziz University, Jeddah, Saudi Arabia

•  D Chenna Kesavaiah and B Venkateswarlu (2019): Chemical reaction and radiation absorption effects on convective flows past a porous vertical wavy channel with travelling thermal waves, International Journal of Fluid Mechanics Research Accepted, (Begell House -Scopus – Free Journal)
•  D Chenna Kesavaiah, K Ramakrishna Reddy and G Priyanka Reddy (2019): MHD rotating fluid past a moving vertical plate in the presence of chemical reaction, International Journal of Information and Computing Science, Vol. 6 (2), pp. 142-154, (UGC Approved Journal), ISSN NO: 0972-1347
•  D Chenna Kesavaiah, Ikramuddin Sohail Md, R S Jahagirdar (2019): Radiation effect on slip flow regime with heat generation, Cikitusi Journal For Multidisciplinary Research, Vol. 6 (1), pp. 7-18, (UGC Approved Journal), ISSN NO: 0975-6876.
•  B Mallikarjuna Reddy, D Chenna Kesavaiah and G V Ramana Reddy (2018): Effects of radiation and thermal diffusion on MHD heat transfer flow of a dusty viscoelastic fluid between two moving parallel plates, ARPN Journal of Engineering and Applied Sciences, Vol. 13 (22), pp. 8863-8872, (Scopus), ISSN:1819-6608.
•  D Chenna Kesavaiah, Ikramuddin Sohail Md , R S Jahagirdar (2018): MHD free convection heat and mass transfer flow past an accelerated vertical plate through a porous medium with effects of hall current, rotation and Dufour effects, Suraj Punj Journal For Multidisciplinary Research, Vol. 8 (11), pp. 46-62, (UGC Approved Journal), ISSN:2394-2886.
•  D Chenna Kesavaiah, N Kumar, C Mahesh (2018): Heat transfer to an unsteady free convection oscillatory Coutte flow through a porous medium, International Journal of Research in Advent Technology, ICOMACE-2018, (UGC Approved Journal), ISSN NO: 2331 – 9637.
•  D Chenna Kesavaiah and R S Jahagirdar (2018): MHD Free Convective Flow through Porous Medium under the Effects of Radiation and Chemical reaction, Journal of Applied Science and Computations, Vol.5 (10), pp. 1125-1140, (UGC Approved Journal), ISSN:1076-5131.
•  D Chenna Kesavaiah and R S Jahagirdar (2018): Radiation absorption and chemical reaction effects on MHD flow through porous medium past an exponentially accelerated inclined plate International Journal for Research in Applied Science & Engineering Technology, Vol. 6 (6), pp. 1370-1381, ISSN: 2321-9653, (UGC Approved Journal).
•  M Bhavana and D Chenna Kesavaiah (2018): Perturbation solution for thermal diffusion and chemical reaction effects on MHD flow in vertical surface with heat generation, International Journal of Future Revolution in Computer Science & Communication Engineering, Vol. 4 (1), pp. 215-220, ISSN: 2454-4248, (UGC Approved Journal) .
•  Srinathuni Lavanya and D Chenna Kesavaiah (2017): Heat transfer to MHD free convection flow of a viscoelastic dusty gas through a porous medium with chemical reaction, International Journal of Pure and Applied Researches, Vol. 3 (1), pp. 43 – 56, ISSN: 2455-474X , (UGC Approved Journal).
• Srinathuni Lavanya and D Chenna Kesavaiah (2017): Radiation effects on MHD natural convection heat transfer flow from spirally enhanced wavy channel through a porous medium, International Journal on Future Revolution in Computer Science & Communication Engineering ,Vol. 3(10), pp. 130-140, ISSN 2454 – 4248 , (UGC Approved Journal)
•  Srinathuni Lavanya, D Chenna Kesavaiah (2014): Radiation and Soret Effects to MHD Flow in Vertical Surface with Chemical reaction and Heat generation through a Porous Medium, International Journal of Computational Engineering Research, Vol, 04, (7), pp. 62-73, ISSN (e): 2250 – 3005 , (UGC Approved Journal)
•  D Chenna Kesavaiah and A Sudhakaraiah (2014): Effects of Heat and Mass Flux to MHD Flow in Vertical Surface with Radiation Absorption, Scholars Journal of Engineering and Technology, 2(2B): pp. 219-225, ISSN 2321-435X , (UGC Approved Journal)
•  D Chenna Kesavaiah, P V Satyanarayana (2014): Radiation Absorption and Dufour effects to MHD flow in vertical surface, Global Journal of Engineering, Design & Technology, Vol. 3 (2), pp. 51-57, ISSN: 2319 – 7293
•  Srinathuni Lavanya, D Chenna Kesavaiah (2014): Magnetic field and Radiation effects on MHD Free convection heat and mass transfer flow through a porous medium with chemical reaction, Int. Journal of Applied Sciences and Engineering Research, Vol. 3, (4), pp. 850-868, ISSN :2277 – 9442
•  Srinathuni Lavanya, D Chenna Kesavaiah and A Sudhakaraiah (2014): Radiation, heat and mass transfer effects on magnetohydrodynamic unsteady free convective Walter’s memory flow past a vertical plate with chemical reaction through a porous medium, International Journal of Physics and Mathematical Sciences, Vol. 4 (3), pp. 57-70, ISSN: 2277-2111
•  Damala Ch Kesavaiah, P V Satyanarayana and S Venkataramana (2013): Effects of Radiation, Chemical reaction and Soret on unsteady flow past an accelerated isothermal infinite vertical plate, 2013, International Journal of Technology and Research Advances, Issue II, pp. 31-41
•  D Chenna Kesavaiah and A Sudhakaraiah (2013): A note on heat transfer to magnetic field oscillatory flow of a viscoelastic fluid, International Journal of Science, Engineering and Technology Research, Vol. 2 (5), pp. 1007-1012, ISSN: 2278 – 7798
•  Amarkanth Reddy K, Kanchan Sanalkar and D Chenna Kesavaiah (2013): A note on efficient reuse scheduling with QoS of bandwidth recycling throughput enhancement in IEEE 802.16 networks, International Journal of Research in Information Technology, Vol. 1(5), pp. 252-256, ISSN: 2001-5569
•  D Chenna Kesavaiah, P V Satyanarayana, A Sudhakaraiah, S Venkataramana (2013): Natural convection heat transfer oscillatory flow of an elastico-viscous fluid from vertical plate, International Journal of Research in Engineering and Technology, Vol. 2 (6), pp. 959-966, ISSN: 2319 – 1163
•  D Chenna Kesavaiah, P V Satyanarayana (2013): MHD and Diffusion Thermo effects on flow accelerated vertical plate with chemical reaction, Indian Journal of Applied Research, Vol. 3 (7), pp. 310-314, ISSN : 2249-555X, (UGC Approved Journal)
•  S Karunakar Reddy, D Chenna Kesavaiah and M N Raja Shekar (2013): Convective heat and mass transfer flow from a vertical surface with radiation, chemical reaction and heat source/absorption, International Journal of Scientific Engineering and Technology, Vol. 2 (5), pp : 351-361, ISSN : 2277-1581, (UGC Approved Journal)
•  D Chenna Kesavaiah, P V Satyanarayana and S Venkataramana (2013): Radiation and Thermo – Diffusion effects on mixed convective heat and mass transfer flow of a viscous dissipated fluid over a vertical surface in the presence of chemical reaction with heat source, International Journal of Scientific Engineering and Technology, Vol. 2 (2), pp: 56-72, ISSN : 2277-1581, (UGC Approved Journal)
•  B. Raveendranadh Singh, Kanchan Sanalkar and D Chenna Kesavaiah (2013): Electrocardiograph (ECG) signal analysis by Neural Networks, International Journal of Scientific Research, Vol. 2(7), pp. 191-195, ISSN: 2277-8179, (UGC Approved Journal)
•  Damala Ch Kesavaiah, A Sudhakaraiah, P V Satyanarayana and S Venkataramana (2013): Radiation and mass transfer effects on MHD mixed convection flow from a vertical surface with Ohmic heating in the presence of chemical reaction, International Journal of Science, Engineering and Technology Research, Vol. 2 (2), pp. 246 – 255, ISSN: 2278 – 7798
•  D Chenna Kesavaiah, P V Satyanarayana and S Venkataramana (2013): Radiation effect on unsteady flow past an accelerated isothermal infinite vertical plate with chemical reaction and heat source, International Journal of Science, Engineering and Technology Research, Vol. 2 (3), pp. 514-521, ISSN: 2278 – 7798
•  S Karunakar Reddy, D Chenna Kesavaiah and M N Raja Shekar (2013): MHD heat and mass transfer flow of a viscoelastic fluid past an impulsively started infinite vertical plate with chemical reaction, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2 (4), pp.973- 981, ISSN: 2319-8753
•  M Bhavana, D Chenna Kesavaiah and A Sudhakaraiah (2013): The Soret effect on free convective unsteady MHD flow over a vertical plate with heat source, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 2 (5), pp. 1617-1628, ISSN: 2319-8753
•  Damala Ch Kesavaiah, P V Satyanarayana and A Sudhakaraiah (2013): Effects of radiation and free convection currents on unsteady Couette flow between two vertical parallel plates with constant heat flux and heat source through porous medium, International Journal of Engineering Research, Vol. 2 (2), pp. 113-118, ISSN : 2319-6890
•  D Ch Kesavaiah, P V Satyanarayana, J Gireesh Kumar and S Venkataramana (2012): Radiation and mass transfer effects on moving vertical plate with variable temperature and viscous Dissipation, International Journal of Mathematical Archive, Vol. 3 (8), pp. 3028-3035, ISSN: 2229-5046 (UGC Approved Journal)
•  Damala Ch Kesavaiah, P V Satyanarayana and S Venkataramana (2012): Radiation absorption, chemical reaction and magnetic field effects on the free convection and mass transfer flow through porous medium with constant suction and constant heat flux, International Journal of Scientific Engineering and Technology, pp. 274-284, Vol.1 (6), ISSN: 2277-1581
•  P V Satyanarayana, D Ch Kesavaiah and S Venkataramana (2011): Viscous dissipation and thermal radiation effects on an unsteady MHD convection flow past a semi-infinite vertical permeable moving porous plate, International Journal of Mathematical Archive, Vol. 2(4), 2011, pp. 476-487, ISSN: 2229-5046 (UGC Approved Journal)
•  D Ch Kesavaiah, P V Satyanarayana and S Venkataramana (2011): Effects of the chemical reaction and radiation absorption on an unsteady MHD convective heat and mass transfer flow past a semi-infinite vertical permeable moving plate embedded in a porous medium with heat source and suction, Int. J. of Appl. Math and Mech. Vol. 7 (1), pp. 52-69, ISSN: 0973-0184, (Free Journal)
• Papers reviewed as Reviewer
  “Begell House (Scopus Journal).

• Two days Workshop attended in JNTU College of Engineering & Technology, Hyderabad, TS, India

• G.Narsimulu “Ethical Leadership”. Aristotle National Seminar on Contemporary Issues in Leadership at KGRCET.
• G.Narsimulu, Mr.Malla Reddy, “Women Participation in Microfinance in India”. Aristotle Journal ISBN: 9789385817007.
• G.Narsimulu “ REVISED Ones Assignment Method for Solving Assignment Problem” e-ISSN: 2348 6848 P-ISSN: 2348795x ,volume 5.May 2018.
• G.Narsimulu “Higher Order Iteration Schemes for Unconstrained Optimization” International Conference at KGRCET, 25 December 2018

• J. Ananthaiah, “Visco-Elastic properties of Nematic Thermotropic Liquid Crystal” (2019 manuscript under preparation).
•  Rasmita Sahoo, J. Ananthaiah, R. Dabrowski and Surajit Dhara, An experi- mental investigation on rheology of cholesteric blue phase with a wide temperature range , (manuscript under preparation).
• J. Ananthaiah, M. Madhavi, “Viscosity studies on Nematic Thermotropic Liquid Crystal”, International journal of Technical innovation in modern Engineering & science 4, 2455 (2018).
•  J. Ananthaiah, Rasmita Sahoo, M. V. Rasna and Surajit Dhara, Rheology of nematic liquid crystals with highly polar molecules , Physical Review E 89, 022510 (2014).
•  Rasmita Sahoo, J. Ananthaiah, R. Dabrowski and Surajit Dhara, Rheology of twist-grain-boundary-A liquid crystals , Physical Review E 90, 012506 (2014).
•  S. Dhara, Y. Balaji, J. Ananthaiah, P. Sathyanarayana, V. Ashoka, A. Spadlo and R. Dabrowski, Active and passive viscosities of a bent-core nematic liquid crystal, Physical Review E 87, 030501(R) (2013).
• J. Ananthaiah, M. Rajeswari, V. S. S. Sastry, R. Dabrowski and Surajit Dhara,
  Rheological properties of reentrant nematic liquid crystal, Physical Review E 86, 011710 (2012).
•  J. Ananthaiah, M. Rajeswari, V. S. S. Sastry, R. Dabrowski and Surajit Dhara,
  E ect of electric eld on the rheological and dielectric properties of a liquid crystal exhibiting nematic-to-smectic-A phase transition, Eur. Phys. J. E (2011) 34.
•  M. Rajeswari, J. Ananthaiah, R. Dabrowski, V. S. S. Sastry, S. Dhara and B.
  K. Sadashiva, Rheological properties of a chiral liquid crystal exhibiting type-II character , Mol. Cryst. Liq. Cryst., Vol. 547: pp. 39/[1729]-45[1735], 2011.
•  Mohd Qasim, J. Ananthaiah, S. Dhara, P. Paik and D. Das, Synthesis and char- acterization of Ultra-Fine colloidal silica Nanoparticles , Advanced Science, Engi- neering and Medicine 6, 965-973, 2014.
•  Satish bykkam, K.Venkateswara Rao, Ch.Shilpa Chakra, V.Rajendar, Rotte Naresh kumar, J. Ananthaiah, Graphene Oxide Thin Films: A Simple Pro lometer for Film Thickness Measurement , International Journal of Engineering and Advanced Technology (IJEAT) 2, pp. 341/[2249]-344[8958], 2013.

•  Selected for Senior Research Fellow (CSIR-SRF) conducted by Council of Scientific and Industrial Research and University Grant Commission (CSIR & UGC), Indian Government.
•  Qualified State Eligibility Test (SET-2012&2014) for Assistance Professor/Lectureship conducted by Osmania University, Hyderabad.
• Qualified Graduate Aptitude Test in Engineering (GATE is an all India examination administered and conducted jointly by the Indian Institute of Science and seven Indian Institutes of Technology on behalf of the National Coordination Board- GATE, Department of Higher Education, Ministry of Human Resource Development (MHRD), Government of India.) in Physics, Feb 2009.
• Achieved Smt. Jogiraju Sree Rangamma Hanumanth Rao Memorial Gold Medal for having secured highest marks in Physics subject the examinations held in March 2006 from Sree Anantha Padmanabha Arts, Science & Commerce College, Vikarabad, Osmania University, Hyderabad.
• Achieved Smt. M. Savithramma Channa Reddy Memorial Gold Medal for having secured highest marks in B.Sc. MPC in the examinations held in March 2006 from Sree Anantha Padmanabha Arts, Science & Commerce College, Vikarabad, Osmania University, Hyderabad.
• Achieved Old Students Association Cash Award for having secured highest marks in Science Faculty in the examination held in March 2006 from Sree Anantha Padman- abha Arts, Science & Commerce College, Vikarabad, Osmania University, Hyderabad.

• Sanjay Kumar and Srinivas Valmiki, Dual Fuel Operation of Performance and Emission Characteristics of Linseed Biodiesel using Acetylene Gas, International Journal of Innovative Science, Engineering & Technology, Vol. 3 Issue 8, pg 7-13, August 2016

• FLOW ANALYSIS IN TWO PASS CHANNEL BY USING CFD (IJERA, vol.4,issue 8(version 7),august 2014, pp.36-46.
•  Heat Transfer Analysis of Refrigerant Flow in an Evaporator Tube (IJERA,vol.4, issue 8(version 5), sept2014.
•  STUDY OF HEAT TRANSFER RATE IN TWO PASS SQUARE CHANNEL (IJSRET, Volume 3, Issue 7, October 2014).
•  PERFORMANCE AND EMISSIONS ANALYSIS USING DIESEL AND TSOME BLENDS (IJMER ,Vol. 4 | Iss.9| Sept. 2014).
•  EVALUATION OF MAHUA OIL BIODIESEL AND ITS BLENDS ON PERFORMANCE AND EMISSION CHARACTERISTICS OF DIESEL ENGINE(Int J Adv Engg Tech/Vol. VII/Issue II/April-June,2016) (Anna university updated journal list).
•  performance analysis of low heat rejection diesel engine, using Mahua oil biofuel(INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2016http://dx.doi.org/10.1080/01430750.2016.1222963, © 2016 Informa UK Limited, trading as Taylor & Francis Group, Anna university annexure-2, s.no:8544).
•  An Experimental Investigation on Performance of C.I Engine When Using LTC withBlending of Diesel, Biodiesel and Ethanol,’ International Journal of Heavy Vehicle Systems, ISSN 1741-5152, Publisher: InderScience enterprises ltd, Indexing: SCI, Scopus, UGC (List-1) , Anna university annexure-1.

• A paper titled “Performance and Emission control with focus on EGR” published in proceedings of the National conference (Emerging research and advances in mechanical science) at Velammal engg college, chennai on 22st Feb 2018.
•  A paper titled “Flow analysis in two pass square channel by using CFD” published in proceedings of the National conference (Recent advances in mechanical engg) at Sri venkateswara college of engg & tech, chittoor on 28th March 2018.
•  A paper titled “Fluid structure interface analysis for reduction of power loss and drag in high speed passenger buses ” published in proceedings of the National conference (Recent trends in mechanical engg) at Global instate of engg and tech , Vellore on 25th May 2014.
•  A paper titled “Fatigue life analysis of wheel rim” published in proceedings of the International conference on recent advancement in mechanical engineering and technology at Vinayaka mission university, Chennai on 23rd -24th April 2015.
•  A paper titled “Modelling and analysis of delamination in vibratory drilling of glass fiber reinforced polymer composite” published in proceedings of the 2nd International conference on advanced research research engineering and applied sciences at SRI college of Engg& Tech, Vandavasi on 21st -23rd March 2015.
•  A poster presentation titled “Biodiesel production and its characteristics-An overview” published in proceedings of the OMICS International Congress & Expo on Biofuels & Bioenergy, Valencia, Spain on 25th -27th August 2015.
•  A paper titled “An Experimental Investigation on Performance of C.I Engine When Using LTC with Blending of Diesel, Biodiesel and Ethanol” published in proceedings of the IOSRD International conference on Future Technologies 2017 at Bangalore(IOSRD) on 10th October 2017.
•  A paper titled “Performance study on C.I engine through combined use of LHR and LTC with biodiesel blends” published in proceedings of the International Conference on Thermal Analysis and Energy Systems 2018 (ICTAES-2018) at Hindustan College of Engineering and Technology, Coimbatore on 12th -13th April 2018.
•  Participated in One Day Seminar on “Principles & Applications Of CFD And Modern Controls” from 22 Feb 2014, at Sri Venkatesa perumal College of Engg & Tech, PUTTUR, A.P.
•  Participated in One Day Seminar on “Future fuels for automobile and aviation” from 28th October 2016, at Siddharth institute of Engg & Tech, PUTTUR, A.P.
•  Participated in two week Faculty development programme on “Recent trends in heat and mass transfer” from 08th -12th may 2015, at Adhiparasakthi Engg college, Melmaruvathur.

• “Experimental Investigation on Machinability of Inconel 800 Using CNC WEDM and Modeling of Process Parameters” Nandakumar C, Mohan B, Midthur A Salman Khan,Volume 13, Number 2, June 2018, pp. 160-165(6) Journal of Advanced Microscopy, ISSN: 2156-7573.
• “Optimization of CNC Wire-Cut EDM Parameters on Inconel 825 using Taguchi Method”, Midthur A Salman Khan, C Nandakumar, M Abdullah, M Mohamed Sameer, Vol 4, pp. 71-81,Special Issue 2018, IIRJET, ISSN: 2456-1983.
•  “Design and Experimental Study of Automatic Sand Sieving Machine”, Midthur A Salman Khan, Mohammed Suhaib F, Noufal Ashfack J, Sak Sadak Azarudeen, M Salman Khan, Vol 5, Issue 12, JETIR, UGC scopes index ISSN 2349-5162

• Industrial Visit: Bosch Spark plug manufacturing in Bengaluru, Biomass plant, Toyota Kirloskar in Bedadi, Jhon F Flower in Electronics city, ITC Tobacco factory Bangalore, Mysore soaps Pvt Ltd

•  “Effect of Crucible Parameters on Planar Flow Melt Spinning Process”
  Published in Springer Journal Name: Transaction of Indian Institute of Metals Year: 2015 68(6):1125-1129 DOI 10.1007/s 1266-015-0657-y.
•  “CFD Analysis Of 2D Transient Melt Flow from Crucible on to the rotating wheel in Planar Flow Melt Spinning Process” Published in Elsevier Journal Name: Materials Today: Proceedings 4 (2017) 2615–2623 .
•  “ 3D Numerical Simulations of ‘Herringbone’ defective ribbon formation in Planar Flow Melt Spinning Process” International Journal of Scientific & Engineering Research, Volume 7, Issue 6, June-2016

•  One Week Workshop on Thermal Aspects in Manufacturing Processes ,JNTUH ,May 2014.

FDP’s attended:

•  One Week FDP on ‘Effective Learning Techniques in Engineering Education ‘ KGRCET,JUNE 2019.
•  A Two Weeks FDP on ‘Rapid casting Techniques” GNIT, Nov 2017.
•  A Three day FDP Program on Computational Fluid Dynamics & Its applications in Engineering, JNTUH, January 2016.

• V International Conference on Material Processing and Characterization, GRIET, March 2016.
• National Conference on Recent Trends in Mechanical engineering, JNTUH, April 2016.
• VI International Conference on Solidification science &Processing, DMRL Nov 2015.
• International Conference on Nano Science & Engineering Applications , JNTUH, June 2014

•  SIMULATION AND PREDICTIVE ANALYSIS OF IMPACT BARRIER FOR THE REPLACEMENT OF HONEYCOMB TEXTILE TECHNOLOGY.IJRI 1401-1402.
•  A SENSOR CONTROLLED BREAKING SYSTEM. IJIAREC ISSN 2348-2079 Volume-5 Issue-2.

• Participated in 3-days workshop on “FINITE ELEMET METHODS IN MECHANICAL ENGINEERING”.
• Participated in a One Week Faculty Development Program on “APPLICATIONS OF CFD IN THERMAL-FLUIDS ENGINEERING”.
•  Participated in a Two Day Faculty Development Program on “Communication Skills: A Tool of Effective Teaching”.
•  CONDUCTED in a Two Day workshop on “NON-DISTRUCTIVE TESTING TECHNIQUES” by Kalva Institute of NDT & Quality Management.
•  Participated in a Two Day Faculty Development Program on “Innovative Teaching Techniques in Engineering Graphics”.
•  Participated in a Faculty Development Program on “Exploring Excellence in Education”.
•  Participated in a Two Day Work shop Program on “3D -Printing Technology”.

• One day Workshop conducted on “AutoCAD” organized by VJIT, Hyderabad Jan 2011.
• Training on Computer Controlled Refrigeration Unit, I.C Engine, EGR, Solar panels, PV-fuel cells, Heat transfer equipment’s by Edibon Inc., Spain. AtShaqra University , KSA.
• Two Days workshop on CREO by canter cadd pvt. Hyderabad.
• 15 Days FDP on Effective Learning and teaching at KGRCET, May, 2018

•  Hassan A Khayyat, Ikramuddin Sohail Mohammed “Testing of Spherically blunted rocket nose cone in an open circuit low speed wind tunnel” European Journal of Scientific research, Volume 140 No 1, June 2016, page. 59-69, ISSN: 1450-216X/1450- 202X.
•  Hassan A Khayyat, Ikramuddin Sohail Mohammed “ CFD Simulation of Flowin
  evaporating unit”International Journal of Mechanical Engineering and
  Technology,Volume 6, Issue 10, Oct 2015, pp. 243-251.
• D Chenna Kesavaiah, Ikramuddin Sohail Md, R S Jahagirdar “MHD free convection heat and mass transfer flow past an accelerated vertical plate through a porous medium with effects of hall current, rotation and dufour effects” Suraj Punj Journal for Multidisciplinary Research Volume 8,
  Issue 11, 2018 Page 46-62, ISSN NO: 2394-2886.
•  Hassan A Khayyat, Ikramuddin Sohail Mohammed “ Design and Analysis of a Flat Plate Solar Collector”, IJRAT, ISSN: 2321-9637, December 2018 ( Special Issue, ICOMACE-2018, Conference).
•  D Chenna Kesavaiah, Ikramuddin Sohail Md , R S Jahagirdar, “Radiation Effect On Slip Flow Regime with Heat Generation” Cikitusi Journal For Multidisciplinary Research, ISSN NO: 0975- 6876, Volume 6, Issue 1, January 2019 P No 7-18

• One day Workshop conducted on “AutoCAD” organized by VJIT, Hyderabad Jan 2011.
• Training on Computer Controlled Refrigeration Unit, I.C Engine, EGR, Solar panels, PV-fuel cells, Heat transfer equipment’s by Edibon Inc., Spain. AtShaqra University , KSA.
• Two Days workshop on CREO by canter cadd pvt. Hyderabad.
• 15 Days FDP on Effective Learning and teaching at KGRCET, May, 2018

• Participated in 10 daysFaculty Development Programme on Entrepreneurship” organized by Entrepreneurship Cell-Osmania University, March 2011 .
• Participated in two-week Faculty Development Programme on Effective Learning methods´organized by KG Reddy College of Engineering andTechnology, JNT University, May 2018.
• SAE India Member No. 7180410776.
• Participated In two-days International Conference on Mechanical Engg, at KGRCET, December, 2018

•  Gold medalist and College top in Intermediate Exam 2005.GATE- 2009: All India Rank1897.
• Certificate of Appreciations from Dean College of Engineering, Shaqra Universityfrom 2015-2017.

• K.Praveen kumar, B H Sridhar, titled “Design and Fabrication of Ackerman steering for hybrid car” International Journal of Research in Advent Technology (IJRAT) special issue December 2018 E-ISSN:2321-9637
•  Katla Praveen Kumar, Dr.S.Sridhara Reddy Dr.G.Gopala Krishna, titled Fabrication of Hybrid Race Car Body Panel With Glass-Fiber Composite Material, International Journal of Scientific Development and Research (IJSDR) ISSN: 2455-2631:Volume 3, Issue 7, July 2018: PP 261-267.
• T.Sankaramoorthy, AG. Ganesh kumar , B saritha,Yesu Ratnam Maddu, K.Praveen Kumar titled “Combined effect of calcium addition and ageing treatment on Mg-6Al-1Zn-XCa alloy immersed in 3.5wt. % NaCl solutions “International Journal of Pure and Applied Mathematics”(IJPAM), ISSN: 1314-3395: Volume 119 No. 16 , July 2018, 3589-3601.
• Katla Praveen kumar “Manufacturing of polymer matrix composites using vacuum assisted resin infusion molding” International Journal of Engineering Technology Science and Research (IJETSR), ISSN 2394 – 3386, Volume 5, Issue 4: April 2018.
•  Katla Praveen kumar “Experimental Investigation on Mechanical Properties of Jute/Glass Reinforced Hybrid Composite Laminate” International Journal for Research in Applied Science & Engineering Technology (IJRASET), ISSN: 2321-9653;Volume 6 Issue I, Jan 2018.
•  Katla Praveen kumar, M.ManzoorHussain,S.Sridhara Reddy,G.Gopala Krishna “ An Overview On Thermal And Mechanical Properties Of Natural Fiber Reinforced Hybrid Composites”, International Journal Of Current Engineering And Scientific Research (IJCESR), ISSN (PRINT): 2393-8374, (ONLINE): 2394-0697, VOLUME-5, ISSUE-1, Jan 2018.
•  Katla.Praveen Kumar, Chetty.Nagaraj Presented a paper titled “An investigation of Mechanical characterization of Orange Peel Reinforced Epoxy Composite” IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278 1684, p-ISSN : 2320–334X, PP 33-41.
•  K.PraveenKumar, M.ManzoorHussain,D.V.Ravishankar, Design And Fabrication Of Fatigue Analysis Test Setup For Composite Material Testing, International Journal of Engineering Sciences and Research Technology (IJESRT), vol.4(11), November 2015, pp.458-478, ISSN: 2277- 9655.
•  K.PraveenKuma,S.Surender, Characterization of Natural Fiber Reinforced Polymers, International Journal of Engineering and Management Research(IJEMR),vol.5,Issue6,December2015,pp.403-410,ISSN(OnLine) :2250-6758. ISSN (Print):2394-6962

• Workshops attended: Attended one – week workshop on” computational approach through MATLAB” held from 7th – 12th November 2016, organized by Department of Mechanical Engineering, at Vardhaman college of Engineering(Autunomous), Hyderabad.
• Participated in Two day workshop on Advanced Welding Techniques held during 21-22 October, 2016, in the Department of Mechanical Engineering , University College of Engineering(Autonomous), Osmania University, Hyderabad, Telangana state.
• Participated in Two week workshop on Advances in Materials & Manufacturing Processes held from 15th to 24th February 2016 at Department of Mechanical Engineering, Sri Chaitanya College of Engineering, Thimmapur, Karimnagar Dist, Telangana state.
• Attended Two –Day Inter National workshop on “Functional And Energy Materials, Manufacturing & structures (FAEMMS-2013)”, March 25th & 26 th 2013, held at University of Hyderabad, Gachibowli, Hyderabad, Organized by School of Engineering Science and Technology (SEST), university of Hyderabad, India. Indian National Academy Of Engineering (Inae), India. & Royal Academy Of Engineering (Rae), United Kingdom (U.K).
• Attended One-Day National Workshop on “ADVANCED TRENDS IN IC ENGINES AND COMBUSTION” on 20th Feb.2013. Organized by the Dept. of Mechanical Engineering, JNTU college of Engineering, Hyderabad.
• Attended Two-Day National Seminar on “PRECISION ENGINEERING” on 10th& 11th of July 2009, jointly organized by Dept. of Mechanical Engineering, JNTU college of Engineering, Hyderabad and PRRM Engineering College shabad.

• A paper titled “Design and Fabrication of Ackerman Steering for hybrid car” published in proceedings of the international conference on Mechanical and Civil Engineering(ICOMACE)-2018 held at K G Reddy college of engineering &Technology Mionabad , Hyderabad on 20-21st December 2018.
• A paper titled “Manufacturing of polymer matrix composites using vacuum     assisted resin infusion molding” published in proceedings of the international conference on International conference on Electrical,Electronics and Communication Engineering (ICEECE-2018), held on 27th-28th April 2018, at St.Peter’s Engineering College, Maisammaguda, Hyderabad.
• A Paper titled ”Formability and Applications of Tailor welded blanks in Automotive Industry” published in proceedings of the 1st international conference on Emerging Trends in Mechanical Engineering (ICETiME 2016), held on 23rd – 24th september, 2016 at Faculty of Science and Technology, IFHE Hyderabad.
• Presented a paper titled “An overview of an applications of tailor welded blanks in automotive industry” published in proceedings of the International conference on Recent Trends in Engineering, Science & Technology (ICRTEST 2016), held on 25th – 27th October, 2016 at St.Peter’s Engineering College, Maisammaguda, Hyderabad.
• Presented a paper titled “An investigation of Mechanical characterization of Orange Peel Reinforced Epoxy Composite” published in proceedings of the International conference {i-CAM2K16} on Recent Innovations in civil and Mechanical Engineering,held at CMR Technical campus, Hyderabad,India during 10th & 11th December, 2016.

⦁ Computational fluid flow analysis of water tube boiler. IJCRT, ISSN: 2320-2882 VOL 6 ISSUE I Dec 2017.

National Journals:
⦁ Published a paper in a International Conference on Mechanical and Civil Engineering (ICOMACE-2018) held on 20, 21 Dec 2018 on the topic “Study of Friction and Wear characteristics of ball bearing by Numerical and Experimental Techniques” at Kgrcet, Hyd.

⦁ Published a paper in a National Conference on Engineering, Science, Technology in Industrial Application and Significance of Free Open Source Softwares held on 21, 22 Dec 2017 on the topic “Heat Transfer analysis of fins with varied geometry and materials” at Kgrcet, Hyd.

⦁ Participated in the two day National Conference on “Advances in Mechanical Engineering & Renewable (AMERE-2013)”, During 25, 26 March, 2013 Organized by the CBIT, Hyd.

• Paper Published in International Journal of Creative Research Thoughts (IJCRT) on “computational fluid flow analysis of rotating turbine with blade angle 150 , ISSN: 2320-2882, pg.no-193-200.